Hot Melt Adhesive For Plastic Straw First of all, straw hot melt adhesive is a kind of hot melt adhesive strip or particle, which is heated and melted by hot melt adhesive gun and sprayed or smeated on the surface of the object that needs to be bonded, waiting for the melt adhesive to cool and solidify to form a stable bond. The color and hardness of hot melt adhesive are different, and different types of hot melt adhesive can be selected according to your needs. Hot Melt Adhesive For Plastic Straw,Food Hot Melt Adhesive,Food Straws Hot Melt Adhesive,Straws Hot Melt Adhesive Shenzhen Tongde New Materials Technology Co., Ltd. , https://www.tdhotmeltglue.com
During the implementation process, because each process unit is equipped with independent sub-process assembly process documents and bills of materials, the assembly content is fixed, the assembly materials are fixed and distributed, the division of work personnel is clear, the responsibility is clear, and the process operation time and auxiliary time are shortened. As a result, the cost of man-hours is reduced; due to the simple skill requirements of the operators, the proficiency procedures are easy to improve, and the overall ergonomics are improved; in the process quality management, the process flow inspections that are synchronized with the process flow should be performed in an orderly manner, making the process phases and The inspection process is very clear, the assembly quality is effectively controlled, and it is conducive to providing a traceability basis for quality responsibility; the production organization process is clear, from the production order to the material allocation, use, and then to the assembly and assembly of the unit to the next line out of the car The entire process is clear and simplified, improving management efficiency.
Then, the use of straw hot melt adhesive need to pay attention to some matters. First of all, you need to select the appropriate hot melt Glue Gun and hot melt glue strips or particles to ensure that they are suitable for the surface of the object that needs to be glued. Secondly, it is necessary to pay attention to the temperature and flow rate of hot melt adhesive, too high or too low temperature and flow rate will affect the bonding effect of hot melt adhesive. In addition, it is necessary to pay attention to the use environment and shelf life of hot melt adhesives to avoid affecting the quality and effect of hot melt adhesives.
Third, straw hot melt adhesive has a variety of advantages. Pipette hot melt adhesive has fast, efficient and stable bonding effect, which can achieve high quality sealing and fixing. At the same time, the straw hot melt adhesive has good water resistance, corrosion resistance, high temperature resistance and other properties, can be applied to a variety of environments and occasions. In addition, the straw hot melt adhesive also has the characteristics of simple operation, no pollution, economic and practical, which has brought a lot of convenience and advantages for production and manufacturing.
In addition, straw hot melt adhesive can also be used in a variety of fields and materials bonding and sealing. Straw hot melt adhesive can be used for bonding and sealing of paper, plastic, metal, ceramics and other materials, and can be applied to packaging, manufacturing, construction and other fields, with a wide range of application scenarios and market demand.
In short, straw hot melt adhesive is a fast, efficient, stable and other advantages of industrial hot melt adhesive, with a wide range of application scenarios and market demand. When using straw hot melt adhesive, it is necessary to pay attention to the selection of hot melt adhesive, the control of temperature and flow rate, so as to avoid affecting the quality and effect of hot melt adhesive.
Xiamen factory 5-6 tons forklift to achieve process assembly production
The CPCD5060A-2 and CPCD60BT forklifts are the leading products of 5-6 ton forklift trucks in our factory. They are effectively guaranteed for the mass production of the organization, the balance of the assembly operation process and the control of the quality of the process, process departments and production, materials and workshops. In close cooperation with other departments, through the previous stages of design, verification, adjustment, and trial operation, the assembly production of the two models has recently realized the operation of the process system, and the assembly process of the entire forklift has been divided into a number of scientific and rational process flows. The more balanced parts and assembly process units are relatively independent and have sub-process assembly operations with interlocking organic links.
Related news: