SF-200 is a Hand belt type resistance Forming Machine which is the best selection for mass production.Easy adjustment,operation and long life.
SF-201 is the same as SF-200,Beside above ,they are Loose Tape resistance Former suitable for vertical or horizontal shaping of resistors and diodes.
SF-202Component bending forming machine is bulk, with resistance and diodes are available.Foot cutting, bending can be strengthened, foot long span can be adjusted.
SF-208FB Axial automatic resistor machine has three Models for Processing Different Type of Packing.
SF-206 The bulk Resistor Former has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.
SF-208 Equipment K Type Resistance Molding Machine has three Models for Processing Different Type of Packing.â‘ Loose packed Model(SF-208-FA).â‘¡Taped Model(SF-208-FB).â‘¢ Loose packed/taped combinative Mode(SF-208-F).
SF-206MB The axial lead former m type has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.It is also means automatic resistor forming m machine.
Resistance Molding Bending Machine,F Resistor Cutting Machine,Component Cutting Forming Machine,Components Lead Cutting Machines SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com
As we all know, the dryer is an indispensable drying equipment in modern industrial production. The dryer industry in China has achieved remarkable results in the development of nearly 30 years. In the 1980s, China produced fewer than 100,000 kinds of dryers. After entering the new century, China has produced more than 500,000 types of dryers.
During these decades of development, the dryer industry has experienced a growth process from scratch and from small to large. Although China's dryer industry started late, but relying on the rapid development of China's chemical, pharmaceutical, food and other industries, China's dryer industry market demand is huge.
From an industry perspective, the dryer industry is growing at such a rapid rate. On the one hand, the dryer industry continues to explore innovation and achieve independent research and development. On the other hand, it is strongly supported by national policies. It is worth mentioning that the state not only encourages policies and financially supports the development of the dryer industry in China, but also provides tremendous support in personnel training and technology research and development.
Today, under the impetus of the party and state leaders, many colleges and universities in China have set up drying technology courses and specialized research institutions, which have provided a large number of talents for the dryer industry in China and provided powerful force for the development of the dryer industry in China. Protection.
The reason for the rapid development of drying equipment: independent research and development policy support
At present, China's dryer industry is mostly located in the eastern region. This is because the eastern region is China's first open area, the economy is relatively prosperous, and industrial technology is relatively advanced. In recent years, with the rise of China's national economy, the continuous development of the central and western regions, China's dryer industry also showed a trend of spreading to the central region.