Truck tool boxes are the ultimate truck accessory for securing your valuable equipment, chains, straps and other trucking and towing essentials. Ganland offers a large range of Aluminum Toolboxes to fit your individual needs, including but not limited to underbody tool boxes, top side tool boxes, trailer tongue boxes, chest style boxes, step boxes, etc. We can produce the toolboxes according to your sizes and types. Thank you for considering Ganland for your next purchase, if you are searching for truck / trailer spare parts don`t forget to check our extensive range, high quality and competitive price, OEM and ODM, welcome.
Aluminum Toolboxes Aluminum Toolboxes,Aluminum Contractor Tool Box,Aluminum Toolboxes With Drawer,Aluminum Toolbox For Truck Jiaxing Ganland Auto Parts Co., Ltd. , http://www.ganlandparts.com
Shanghai Zenith is one of the largest magnetic separator drum manufacturers in China. Our magnetic separator/magnetic beneficiation/drum separator falls into wet magnetic separator/wet magnetic beneficiation/wet drum separator and dry magnetic separator/dry magnetic beneficiation/dry drum separator.
Permanent cylindrical wet magnetic separator/wet magnetic beneficiation/wet drum separator is use for wet separation of ferromagnetic minerals and non-ferromagnetic minerals. Wet magnetic separator/wet magnetic beneficiation/wet drum separator can work continuously with its large working clearance, good magnetic depth, and strong processing capacity. Wet magnetic separator/wet magnetic beneficiation/wet drum separator working principle is that when the pulps enter the magnetic zone, the ferromagnetic minerals are absorbed at the wall of the cylinder. The weekly magnetic and non-magnetic minerals are then swung off. Thus, the ferromagnetic minerals and non-ferromagnetic minerals are separated by this permanent cylindrical wet magnetic separator/wet magnetic separator/wet drum separator.
The cylinder of this permanent cylindrical wet magnetic separator drum can be matched with three kinds of tanks: CTS, CTN and CTD for different separation requirements. The CTS is suitable for roughing and concentrating minerals with a granularity range from 0 to 6mm. CTN is suitable for both roughing and concentrating minerals with a granularity range from 0 to 0.6mm and recycling dense media in coal preparation industry. CTD is suitable for roughing and concentrating minerals with a granularity range from 0 to 0.5mm. It is particularly suitable for concentrating of minerals with a granularity range from 0 to 0.15mm.
Permanent cylindrical dry powder magnetic separator is available from one cylinder to four cylinders. It is a magnetic separator that is used to continuously remove iron from dry powder materials. This magnetic separator adopts NdFeB as the magnetic source and is of strong magnetic force, strong suction, high efficiency, free maintenance, good energy efficiency, safe operation, and more characteristics. The charging speed is controllable for different granular requirements. This magnetic separator is widely used for applications in grinding material and apparatus, fireproofing materials, non-metal mineral processing, carbon black, food, fodder and chemical material industries.
Magnetic separator Working Principle:
When the pulp flows to the tank in the magnetic separator/magnetic beneficiation/drum separator, the mineral granules spreads under the impact of the water flow from the show pipe. As a result of the magnetic force, the magnetic minerals concentrate as a lump or a chain. This lump or chain is then absorbed on the cylinder owing to the magnetic force. When the magnetic lump or chain rotates with the cylinder, gangues and other non-magnetic minerals falls off from the lump or chain and are then discharged with the pulp. The lump or chain left at the wall of the cylinder is ore concentrate. It is then discharged off from the magnetic separator/magnetic beneficiation/drum separator with water.
Magnetic separator parameters:
Model
Roller Size DxL (mm)
Speed (r/min)
Capacity (T/h)
Overall Dimension LxWxd (mm)
Power (kw)
Weight (t)
CT(S/N/B)-712
750x1200
35
10-15
2330x1770x1280
3
1.85
CT(S/N/B)-718
750x1800
35
20-35
2930x1770x1280
3
2.43
CT(S/N/B)-918
900x1800
28
25-40
3095x1769x1465
4
2.75
CT(S/N/B)-924
900x2400
28
40-55
3695x1769x1465
4
3.65
CT(S/N/B)-1018
1050x1800
22
45-60
3115x1999x1565
5.5
3.6
CT(S/N/B)-1021
1050x2100
22
52-70
3415x1999x1565
5.5
4.2
CT(S/N/B)-1024
1050x2400
22
60-80
3715x1999x1565
5.5
4.8
CT(S/N/B)-1030
1050x3000
22
80-120
4315x1999x1565
7.5
6.26
CT(S/N/B)-1218
1200x1800
19
60-75
3150x2300x1920
7.5
5.85
CT(S/N/B)-1224
1200x2400
19
80-110
3750x2300x1920
7.5
6.97
CT(S/N/B)-1230
1200x3000
19
100-140
4350x2300x1920
7.5
8.5
CT(S/N/B)-1545
1500x4500
14
160-220
6050x2700x2300
15
15
Note: The magnetic strength should be determined in accordance with the nature of the ore. CT series wet magnetic separator can be customer-made.
Magnetic separator introduction:
Shanghai Zenith is one of the largest magnetic separator drum manufacturers in China. Our magnetic separator/magnetic beneficiation/drum separator falls into wet magnetic separator/wet magnetic beneficiation/wet drum separator and dry magnetic separator/dry magnetic beneficiation/dry drum separator.
Permanent cylindrical wet magnetic separator/wet magnetic beneficiation/wet drum separator is use for wet separation of ferromagnetic minerals and non-ferromagnetic minerals. Wet magnetic separator/wet magnetic beneficiation/wet drum separator can work continuously with its large working clearance, good magnetic depth, and strong processing capacity. Wet magnetic separator/wet magnetic beneficiation/wet drum separator working principle is that when the pulps enter the magnetic zone, the ferromagnetic minerals are absorbed at the wall of the cylinder. The weekly magnetic and non-magnetic minerals are then swung off. Thus, the ferromagnetic minerals and non-ferromagnetic minerals are separated by this permanent cylindrical wet magnetic separator/wet magnetic separator/wet drum separator.
The cylinder of this permanent cylindrical wet magnetic separator drum can be matched with three kinds of tanks: CTS, CTN and CTD for different separation requirements. The CTS is suitable for roughing and concentrating minerals with a granularity range from 0 to 6mm. CTN is suitable for both roughing and concentrating minerals with a granularity range from 0 to 0.6mm and recycling dense media in coal preparation industry. CTD is suitable for roughing and concentrating minerals with a granularity range from 0 to 0.5mm. It is particularly suitable for concentrating of minerals with a granularity range from 0 to 0.15mm.
Permanent cylindrical dry powder magnetic separator is available from one cylinder to four cylinders. It is a magnetic separator that is used to continuously remove iron from dry powder materials. This magnetic separator adopts NdFeB as the magnetic source and is of strong magnetic force, strong suction, high efficiency, free maintenance, good energy efficiency, safe operation, and more characteristics. The charging speed is controllable for different granular requirements. This magnetic separator is widely used for applications in grinding material and apparatus, fireproofing materials, non-metal mineral processing, carbon black, food, fodder and chemical material industries.
Magnetic separator Working Principle:
When the pulp flows to the tank in the magnetic separator/magnetic beneficiation/drum separator, the mineral granules spreads under the impact of the water flow from the show pipe. As a result of the magnetic force, the magnetic minerals concentrate as a lump or a chain. This lump or chain is then absorbed on the cylinder owing to the magnetic force. When the magnetic lump or chain rotates with the cylinder, gangues and other non-magnetic minerals falls off from the lump or chain and are then discharged with the pulp. The lump or chain left at the wall of the cylinder is ore concentrate. It is then discharged off from the magnetic separator/magnetic beneficiation/drum separator with water.
Magnetic separator parameters:
Model
Roller Size DxL (mm)
Speed (r/min)
Capacity (T/h)
Overall Dimension LxWxd (mm)
Power (kw)
Weight (t)
CT(S/N/B)-712
750x1200
35
10-15
2330x1770x1280
3
1.85
CT(S/N/B)-718
750x1800
35
20-35
2930x1770x1280
3
2.43
CT(S/N/B)-918
900x1800
28
25-40
3095x1769x1465
4
2.75
CT(S/N/B)-924
900x2400
28
40-55
3695x1769x1465
4
3.65
CT(S/N/B)-1018
1050x1800
22
45-60
3115x1999x1565
5.5
3.6
CT(S/N/B)-1021
1050x2100
22
52-70
3415x1999x1565
5.5
4.2
CT(S/N/B)-1024
1050x2400
22
60-80
3715x1999x1565
5.5
4.8
CT(S/N/B)-1030
1050x3000
22
80-120
4315x1999x1565
7.5
6.26
CT(S/N/B)-1218
1200x1800
19
60-75
3150x2300x1920
7.5
5.85
CT(S/N/B)-1224
1200x2400
19
80-110
3750x2300x1920
7.5
6.97
CT(S/N/B)-1230
1200x3000
19
100-140
4350x2300x1920
7.5
8.5
CT(S/N/B)-1545
1500x4500
14
160-220
6050x2700x2300
15
15
Note: The magnetic strength should be determined in accordance with the nature of the ore. CT series wet magnetic separator can be customer-made.
CT Series Magnetic Separator Drum/Drum Magnetic Separator
Model NO.: CT series
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Grey
Customized: Customized
Condition: New
Spare Parts Supply: for Whole Year
After-Sale Service: for Whole Using Year
Test&Installation: Engineer Assigned
Export Markets: Global
Trademark: Zenith
Specification: CE, ISO
Origin: Shanghai Zenith, China
HS Code: 8474209000
Model NO.: CT series
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Grey
Customized: Customized
Condition: New
Spare Parts Supply: for Whole Year
After-Sale Service: for Whole Using Year
Test&Installation: Engineer Assigned
Export Markets: Global
Trademark: Zenith
Specification: CE, ISO
Origin: Shanghai Zenith, China
HS Code: 8474209000
Magnetic separator introduction: