The structure of the pendulum feeder is shown below. The number of swings of the valve fan is generally 45 to 50 times/min. When the valve fan is retracted, the material is discharged from a gap formed by the valve fan and the valve body. This gap is determined by the eccentricity of the yaw. The adjustment range of the eccentricity varies depending on the specifications of the feeder. It can be seen that this feeder only adapts to the feeding of fine powder (the granularity generally does not exceed 25 mm). There are not many varieties of pendulum feeders, and the specifications are small, and they are mostly used as feeding devices for ball conveyor belt conveyors. Cast Iron Pump Parts,Cast Iron Water Pump Parts,Cast Iron Hand Pump Parts,Cast Iron Pitcher Pump Parts Shijiazhuang Zhongjia Slurry Pump Co.,Ltd. , https://www.zjoemparts.com
The production volume of the pendulum feeder is calculated as follows:
Q t -=60bhlγnф
Where Q t ———production quantity, t/h;
b———the width of the discharge port, m;
h———The gap between the valve fan and the valve body is high, m;
l———the valve fan swing stroke, m;
Γ—the loose density of the material, t/m;
n———the number of eccentric turns, r/min;
————The coefficient is generally taken as ф0.3～0.4.