Other Series Of Plate Heat Exchangers Thermal hybrid design technology enables plates of the same specification to have a wider range of adaptability to working conditions. Two angle plates are used in the plate structure design to form three channels, realize five channel combinations, and ultimately achieve PHE energy-saving requirements. Through the heat transfer calculation software simulation with THT's independent intellectual property rights and the optimized combination of plate channels, the optimal selection of heat transfer performance and resistance is achieved, saving investment for customers.
Other Series Of Plate Heat Exchangers,Other Series Of Brazed Plate Heat Exchanger,Other Series Of Plate Type Heat Exchanger,Plate And Shell Heat Exchanger Siping Juyuan Hanyang Plate Heat Exchanger Co., Ltd , https://www.tj-heatexchange.com
Kevlar fiber braided packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant. Braided into squarn cross section. As the strength and module of Kevlar is as high as the steel-like strength. So this packing compared with other kinds of braided packing. They can resist more serve media andhigher pressure. It can be installed separately or as end rings with other kinds of packing to combine diHerent characteristics into packing set.
This packing is mainly used as substitute of asbestos in pump systems. Its property is better than asbestos. And it covers all the services ranges which asbestos packing provides and more. Under very bad conditions where ordinary asbestos packing can not provide the satisfied effect. But this packing has long service. It is usually applied to pulp factory. Sand slurry tin mine and feed water pump of power plant etc.
Main specification of Kevlar fiber braided packing:
Temperature: 200~280C
Pressure: 2~10MPa
pH range: 2~13
Density: 1.4 g/cm3
Velocity 2~18m/s
Â