Mechanical Design of Large Three Drum Rotary Dryer for Sale

Model NO.: Customized
Factory Visit: Welcome
Volume: 9.4
Reducer: Jzq350
Thickness: 8mm
Weight: 5.7t
Fan Power: 5.5kw
Yield: 1-4t
Power: 7.5kw
Structure: Rotary Type Drier
Operational Method: Continuous
Appearance of Dried Sample: Bulk
Type of Flow: Contra-Flow
Type of Atomization: Pressure Atomization
Sprayer: Air-Flowing Type
Trademark: Hongke
Transport Package: Standard Export Package, Suitable for Sea Shipping
Specification: 1 * 12m
Origin: Zhengzhou, Henan, China
HS Code: 8419399090
Features of  large three drum rotary dryer
 Large three drum rotary dryer uses new type of feeding and discharging devices, which puts an end to the uneven feeding jams and discontinuous return of slag drier, and reduces the dust load on the system. Innovation on the internal structure is implemented, which strengthens the cleaning and heat transfer of decentralized materials, eliminating the dip-sticking to the cylinder wall.
 
Working principle of  large three drum rotary dryer
1.Material is sent to hopper through belt conveyor or bucket conveyor, and then charger enters into feeding end through feeding pipe.
2. Indication of feeding pipe should be more than crater angle of material so that material is smoothly flowed into dryer.
3. Dryer cylinder is slightly leaned to horizontal line. Material is added from upper end, while heat-carrying agent is entered from lower end, forming counter-current contact with material. Sometimes heat-carrying agent and material are flowed into barrel.
4. With rotation of cylinder, material runs to upper end upper gravity action. When moist material is moved forward in barrel, it directly and indirectly gained supply of heat-carrying agent so that moist material can be dried and sent through belt feeder or screw conveyor in discharging end.
5. Inner wall of slag dryer barrel is equipped with lifting board. Its function is to lift material and spread increase contact surface of material and air flow so as to improve drying rate and accelerate material. 
6. After heat-carrying agent is dried, cyclone dust collector shall gather material carried by gas (heat-carrying agent is generally divided into hot air and fuel gas).
For further reduction of tail gas dust load, it can be discharged after passing bag-type collector or wet collector.
 
Specification and technical parameters
Φ 0.8 × 8 4 JZQ350 8 3.2 4 4 0.5-2
Φ 0.8 × 10 5 JZQ350 8 3.7 4 4 0.5-2.5
Φ 1 × 8 6.3 JZQ350 8 4.5 5.5 4 1-2.5
Φ 1 × 10 7.9 JZQ350 8 5.2 5.5 5.5 1-3
Φ 1 × 12 9.4 JZQ350 8 5.7 7.5 5.5 1-4
Φ 1.2 × 10 11.3 JZQ400 10 9 11 7.5 1-4.5
Φ 1.2 × 12 13.6 JZQ400 10 10 11 7.5 1-4.8
Φ 1.2 × 14 15.8 JZQ400 10 11 11 7.5 1-5
Φ 1.2 × 16 18 JZQ400 10 12 11 7.5 2-6
Φ 1.5 × 12 21.2 JZQ500 12 14.4 11 7.5 2-9
Φ 1.5 × 14 24.7 JZQ500 12 15.6 15 11 2-9.5
Φ 1.5 × 16 28.3 JZQ500 12 16.8 15 11 2-10
Φ 1.8 × 14 35.6 JZQ500 16 23 18.5 15 5-11
Φ 1.8 × 16 40.7 JZQ500 16 24.5 18.5 15 5-12
Φ 1.8 × 18 45.8 JZQ500 16 26 18.5 15 5-13
Φ 2 × 18 56.5 JZQ650 18 31 22 18.5 5-15
Φ 2 × 20 62.8 JZQ650 18 33 30 22 5-16
Φ 2 × 22 69 JZQ650 18 35 30 22 5-17
Φ 2.2 × 18 68.3 JZQ650 20 38 30 22 8-18
Φ 2.2 × 20 75.9 JZQ650 20 42 30 22 8-19
Φ 2.2 × 22 83.5 JZQ650 20 46 30 22 8-20
Φ 2.2 × 24 91.1 JZQ650 20 50 30 22 8-21
Φ 2.4 × 16 72.3 JZQ650 22 45 37 30 10-20
Φ 2.4 × 20 90.4 JZQ750 22 51 45 37 10-22
Φ 2.4 × 24 108.2 JZQ750 22 60 55 37 10-25
Φ 2.4 × 28 126.6 JZQ750 24 67 75 55 10-30
Φ 2.7 × 18 1.03 JZQ750 24 55 75 55 15-25
Φ 2.7 × 24 137.3 JZQ750 24 68 75 55 15-30
Φ 3 × 20 141.3 JZQ900 25 81 75 55 25-30
Φ 3.2 × 20 160 JZQ900 25 95 90 55 25-35
Φ 3.2 × 28 225 JZQ900 25 101 90 75 25-40
Φ 3.5 × 24 230 JZQ900 25 120 110 75 30-50

FAQ
1.What is the raw material do you want to process?
2.What is the capacity per hour do you need?
3.What is the raw material input size?
4.What is the output size of you product?
 
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification,so pls leave us an inquiry to know more details about price,packaging shipping and discount.
Now,please click the following contact to send us email for best offer and more details!
 
↓↓↓
 
Web:www.rotarykilnhk.com
Henan Hongke Heavy Machinery Co.,ltd
Tel Fax:86-371-68617124
Phone:86-15236618748
 
 

PVC Edge Banding For Cabinet

The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.

The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.

Judge good or bad
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.

PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com