Fully Automatic Welded Mesh Machine

Cross Wire Feeding Unit(pre-cut)
it is installed on the upper of the mesh grid set device.it consists of walking platform,cross wire stacking unit,wire distrbution device and wire feeding device.
The distribution device and the wire feeding are driven by pneumatic system under the operation by electrical control system.
Automatic cross wire feeding without the need for manual labor. it is designed for the cross wire is fed from pre-cut wire

Welding System
Welded system is made up of the rack,welding transformer,pressurized cylinder,upper electrode combination,lower electrode combination,cross wire magnetic locator,lift mesh unit,line wire bracket combination,pneumatic system,Water Cooling System and others spare parts.
Welding materal:cold rolled wire,cold rolled round wire,hot rolled wire.

Mesh Pull Out System
it consists of blanking plate,gantry,chain link mesh netting machine and convey car(or roller guide),the flipper(stacker-turner)is optional part.
Max length of wire mesh:6000 mm.

CNC Mesh Position Unit
Mesh position unit usage is feed forward the welding mesh,at the same time ensure the line wire spacing in need,which adjust cross line spacing according to the automatic setting.
CNC mesh position system can adjust the cross wire spacing automatically,and can save the data in the system, it is easy,convenient and accuracy to adjust the cross wire spacing.

Line Wire Straightening Table
25 set straightening units for line wire.(based on the mesh width is 2400 mm,mesh opening is 100*100mm).
May change the line wire diameters without replacing straightening rolls.



Technical Parameters

Finished wire mesh 


Contact : larry
 
 
 
Tel : (+86)-311-86211202 Fax : (+86)-311-88632356
Web : http://ap-kaiye.en.made-in-china.com