-
Model NO.: HVT-F
-
Max.Capacity: >400 L/min
-
Structure: Single-stage Pump
-
Start Up: Electric Pump
-
Application: Submersible Pump, Sewage Pump
-
Theory: Vortex Pump
-
Transport Package: cardboard
-
Origin: China
-
Max.Head: 10-30m
-
Driving Type: Motor
-
Power: Electric
-
Type: Submersible Sewage Pumps
-
Media: Dirty Water
-
Trademark: HAPPY OR OEM
-
Specification: CE, ISO9001, RoHS
-
HS Code: 8413709190
Submersible Pump Application
Submersible sewage pumps widely used in agriculture, architecture
Mine, environment protection and industry, such as drainage slurry
Waste water, which contained short fibre, long fibre, wastepaper
Sand and so on, it is also an ideal equipment for irrigation.
Operating conditions
*The maximum deep it is allowed in water
Is 5m from its center of impeller;
*Max. Medium temperature +40;
*Trans medium's pH: 4-10;
*Kinematics viscosity of the trans mediumis;
710-7-2310-6m2/s;
*Density of the trans medium limit;
1.2103kg/m3;
The solid diameter is about 10-20mm.
Motor
*Closed, externally ventilated
*Insulation Class B
*Protection IP68
Material
*Pump body: Cast iron
*Impeller: Cast iron
*Shaft with rotor: AISI 416 stainless steel
*Mechanical seal: Stainless steel/Carbon-ceramic
*Thermal protector
*Motor housing: Stainless steel
*Cable: 6 meters
*Euro-plug
Single phase 220V-230V/50Hz
Three phase 380V-50Hz if request
Three phase 220V/440V/60Hz if request
NO. |
TYPE |
POWER |
VOLT |
FREQ |
MAX.FLOW |
MAX.HEAD |
OUTLET |
N.W |
PACKING DIMENSION |
(Kw) |
(Hp) |
(V) |
(Hz) |
(L/min) |
(m) |
lnch(mm) |
(Kg) |
(mm) |
A |
HVT-550F |
0.55 |
0.75 |
220 |
50 |
333 |
9.5 |
2"(50) |
16.5 |
249 165 430 |
B |
HVT-750F |
0.75 |
1 |
220 |
50 |
367 |
10.5 |
2"(50) |
17.5 |
249 165 440 |
C |
HVT-1100F |
1.1 |
1.5 |
220 |
50 |
450 |
13.5 |
2"(50) |
19.1 |
249 165 460 |
D |
HVT-1500F |
1.5 |
2 |
220 |
50 |
517 |
15.5 |
2"(50) |
20.9 |
249 165 480 |
1. Introduction of Waste Motor Oil Distillation Plant
Waste Motor Oil Distillation Plant ,is the new technology which can refine the waste motor oil into base oil(which can be made into diesel and gasoline after processed by our catalyst). The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type" vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually.
2. Raw material which can be used
a. Waste oil .example: waste diesel, waste oil residue etc.
b. tire/rubber oil
c. plastic oil
d. crude oil
e. waste engine oil
f. waste motor oil
g. waste lube oil
h. waste transformer oil
i. underground oil
3. Models of waste motor oil distillation plant
4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste motor oil distillation plant ,and buyer will be in charge of the food, accommodation and round air tickets.
5.Waste Motor Oil Distillation Plant Exporting Experience:
America:
|
Brazil, Canada, Colombia, USA,
|
Middle East:
|
Dubai, Iran, Jordan, Saudi Arabia, Turkey
|
Europe:
|
Albania , Bosnia and Herzegovina
|
Asia:
|
Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
|
Africa:
|
Ghana, Mozambique, Zambia
|
Waste Motor Oil Distillation Plant
Waste Motor Oil Distillation Plant,Used Motor Oil Regeneration Plant,Waste Oil Recycling Diesel Plant,Diesel Oil Distillation Plant
Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com