Mushroom Head Square Neck Carriage Bolt DIN603

Model NO.: DIN603
Application: Machinery
Finish: Polishing
Name: Mushroom Head Square Neck Carriage Bolt DIN603
Surface: Passivation, Polishing,Zinc Plated,Galv.
Thread Length: Full Thread and Half Thread
Size: M2-36
Sample: Free
Trademark: Goshen
Specification: SGS
Origin: Zhejiangjiaxing
HS Code: 7318150001
Model NO.: DIN603
Application: Machinery
Finish: Polishing
Name: Mushroom Head Square Neck Carriage Bolt DIN603
Surface: Passivation, Polishing,Zinc Plated,Galv.
Thread Length: Full Thread and Half Thread
Size: M2-36
Sample: Free
Trademark: Goshen
Specification: SGS
Origin: Zhejiangjiaxing
HS Code: 7318150001
We are professional suppliers on high quality fasteners, insisted on the principle of high quality and the
Best service. Our products and service have extended to Europe, East Asia, North America, middle east
And all over the world.
Our company supply various kinds of carriage bolt, such as DIN603 mushroom head square neck carriage bolt, stainless steel DIN603 mushroom head square neck carriage bolt, stainless steel 304 DIN603 mushroom head square neck carriage bolt, stainless steel 316 DIN603 mushroom head square neck carriage bolt, carbonsteel DIN603 mushroom head square neck carriage bolt, made of different material, and many types of bolts, screws, washers, etc

If you are interested in our products, welcome to give us a call or send us an email with your request for quote or stock checks.
Name Mushroom Head  Square Neck Carriage Bolt DIN603
Place of Origin Jiaxing, Zhengjiang, China
Size M2-M36 or non-standard as request&design
Finish plain, zinc plated, black oxide, hot dip galv.et
Head Type Mushroom head
Material Carbon steel, stainless steel, alloys steel   etc.
Grade A2,A4,4.8,8.8,10.9,12.9.etc
Standard GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc
Non-standards OEM is available, according to drawing or samples
Samples Samples are free.
Package Bulk in master cartons, then on pallets, or according to customers' requirement.
Payment T/T

We are professional suppliers on high quality fasteners, insisted on the principle of high quality and the
Best service. Our products and service have extended to Europe, East Asia, North America, middle east
And all over the world.
Our company supply various kinds of carriage bolt, such as DIN603 mushroom head square neck carriage bolt, stainless steel DIN603 mushroom head square neck carriage bolt, stainless steel 304 DIN603 mushroom head square neck carriage bolt, stainless steel 316 DIN603 mushroom head square neck carriage bolt, carbonsteel DIN603 mushroom head square neck carriage bolt, made of different material, and many types of bolts, screws, washers, etc

If you are interested in our products, welcome to give us a call or send us an email with your request for quote or stock checks.
Name Mushroom Head  Square Neck Carriage Bolt DIN603
Place of Origin Jiaxing, Zhengjiang, China
Size M2-M36 or non-standard as request&design
Finish plain, zinc plated, black oxide, hot dip galv.et
Head Type Mushroom head
Material Carbon steel, stainless steel, alloys steel   etc.
Grade A2,A4,4.8,8.8,10.9,12.9.etc
Standard GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc
Non-standards OEM is available, according to drawing or samples
Samples Samples are free.
Package Bulk in master cartons, then on pallets, or according to customers' requirement.
Payment T/T

"Gravity Die Casting. A permanent mould casting process, where the molten metal is poured from a vessle of ladle into the mould, and cavity fills with no force other than gravity, in a similar manner to the production of sand castings, although filling cn be controlled by tilting the die."

Gravity Die Casting

Sometimes referred to as Permanent Mould, GDC is a repeatable casting process used for non-ferrous alloy parts, typically aluminium, Zinc and Copper Base alloys.

The process differs from HPDC in that Gravity- rather than high pressure- is used to fill the mould with the liquid alloy.

GDC is suited to medium to high volumes products and typically parts are of a heavier sections than HPDC, but thinner sections than sand casting.

There are three key stages in the process.

  1. The heated mould [Die or Tool] is coated with a die release agent. The release agent spray also has a secondary function in that it aids cooling of the mould face after the previous part has been removed from the die.
  2. Molten metal is poured into channels in the tool to allow the material to fill all the extremities of the mould cavity. The metal is either hand poured using steel ladles or dosed using mechanical methods. Typically, there is a mould [down sprue" that allows the alloy to enter the mould cavity from the lower part of the die, reducing the formation of turbulence and subsequent porosity and inclusions in the finished part.
  3. Once the part has cooled sufficiently, the die is opened, either manually or utilising mechanical methods.

Advantages

  • Good dimensional accuracy
  • Smoother cast surface finish than sand casting
  • Improved mechanical properties compared to sand casting
  • Thinner walls can be cast compared to sand casting
  • Reverse draft internal pockets and forms can be cast in using preformed sand core inserts
  • Steel pins and inserts can be cast in to the part
  • Faster production times compared to other processes.
  • Once the tolling is proven, the product quality is very repeatable.
  • Outsourced Tooling setup costs can be lower than sand casting.

Gravity Casting Parts

Gravity Casting Parts,Aluminum Alloy Gravity Casting Parts,Aluminum Gravity Die Casting Parts,Gravity Casting Aluminum Parts

HSI INDUSTRIEL LTD , https://www.hsiindustriel.com