TEE
Size
1/2"-72" DN15-DN2000
Wall thickness
SCH5-SCH160XXS
Standard
ISO,SNSI,JIS,DIN,ASME,Sh3408 SH3409 HG/T21635 HG/T05010
Material
Carbon Steel like A234 WPB, 20G, A105, Q235A/B and alloy steel like ASTM A234 WP5, WP11, WP12
Executive Standard
ASME B 16.9, DIN, JIS, BS, etc
Type
Seamless
Welding Method
Butt Welding
Surface Treatment
grit blasting, black or transparent painting or according to the requirement of client
Stainless Steel Tees, Carbon Steel Tee, Galvanized Steel Tee, Steel Pipe Tee Cangzhou Weiheng Pipe Industry Co.,Ltd , https://www.czweiheng.com
 Steel floor deck roll forming machine
 
 A.Roll forming machine
1.Forming stations:25 roll stations
2.Shaft:O.D.90mm,high frequency treatment and color coating
3.Material of rollers:S45C with heat treatment,and surface is being hard chrome coated
4.Horsepower:11kw/2 sets
5.Transmission:Chain
6.Forming Speed:8-11meters/minute
7.Forming Thickness:1.0-2.0mm (1)CQ mild sheet is used,yiled strength=235-300MPA) (2)The finished products will slightly change if using different material and thickness.
8.Cutting:
(1)Flat sheet cutting:it is used when changing the coil of raw material.It can cut the sheet rapidly and be time saving (2)Cutting after forming:Cut the sheet after roll forming to required length
(3)Cutting motion:The main machine automaticlly stops and the cutting will take place.After the cutting,the main machine will automaticlly start.
(4)Material of blade:cr12 with heat treatment,hardness:58-62HRC
(5)Length measuring:automatic length measuring
(6)Tolerance of length:+/-2mm
9.Approximate size:length:9.6m*width:1.3m*height:1.4m
10.Characteristics of the main machine
(1)Base is made of high tensile strength H beam with precision welded and god rigidity
(2)Shaft,roller and all components are manufacturered precisely to have long lifetime
(3)Efficient design,easy maintence.
B.Uncoiler
1.Specification:Single head hydraulic uncoiler: 1SET
(1)Horsepower:3kw
(2)Capacity of uncoiler:5tons
(3)Expansion of segment:hydraulic
(4)Rotation of segment:hydraulic
(5)Number of segment:4
(6)Range of segment expansion:480-520mm
(7)Maximum outer diameter of coil:1.7m
(8)Maximum width of coil:1250mm
(10)Feeding speed:0-30meters/minute
(11)Approximate size:Length:2.3m width:1.1m height:1.5m
(12)Speed control:A sensor used to control the speed
(13)Operation method:Manual&Automatic
(14)Characteristics;Hydraulic system is used to be the power of the open,closure and rotation of segment.The speed sensor of the uncoiler.The speed sensor of the uncoiler enables the uncoiler to automaticlly adjust the speed to match up the production of the roll forming machine
C.Control Panel:
1.Constrol system:
?The whole line is controller by PLC and touch screen.The PLC system is with high speed communication module,it is easy for operation.The technical date and system parameters can be set by touch screen. The brand of main componeents:
(1)PLC:panasonic
(2)Frequency:Schnieder
(3)Touch screen:xinjie ?The total length of the order is automaticlly counted;When the material's supplu is enough,the material will automaticlly stop entering the machine,which is the convenient device for changing different mateiral for different orders.
?Noted:all the parameters can be changed as the customer's requirement,and different machine.
Â
Â
Â
Technical parameters:
1
Name of commodity & specification
XN-1000 roof panel roll forming machine
2
Main motor power
4/5.5/7.5kw, 3 phase
3
Hydraulic motor power
3kw
4
Hydraulic Pressure
10-12MPa
5
Voltage
380V /3phase/ 50 HZ (or as your requirement)
6
Control System
PLC Delta Inverter
7
Main Frame
300mm H-Beam
8
Backboard Thickness
14mm
9
Chain Size
20mm
10
Feeding Material
color steel coils
11
Feeding Thickness
0.3-0.8mm
12
Feeding Width
1200mm
13
Effective width
950mm
14
Productivity
1-3m/min
15
Roll Station
13
16
Roller Diameter
70mm
17
 Roller material
 45# steel
18
 Cutter material
Cr12 , quenched
19
Cr-Plating Size
0.05mm
20
Overall Size
6000×1650×1100mm
21
Total Weight
4T
22
Components
Manual Uncoiler-------------------1 set
Guiding Platform------------------1 set
Coil Strip Leveler------------------1 set
Main Machine of Roll Forming------1 set
Electric-Motor---------------------1Â set
Cutting Device--------------------1 set
Hydraulic Station------------------1 set
PLCÂ Control-----------------------1Â set
Supporter Table-------------------1 set
23
Workflow
Manual decoiling----feeding and guiding----roll forming----cut to length----run out table
24
Package
nude in the container
25
Minimum order quantity
1Â set
26
Payment terms
T/T(30% T/T pay in advance, the remaining 70% pay before ship)
27
Delivery time
30  working days later after receiving the deposit
All technical parameters can be changed, according to user's need.
Â
