250kVA / 200kW SILENT type Diesel Generator
Powered by CUMMINS engine and coupled with STAMFORD alternator.
Prime Power:
This rating is for the supply of continuous electrical power (at variable load). There is no limit on the annual hours of operation and 10% overload power can be supplied for 1Â hour in 12.
Standby Power:
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Rated voltage:
Available with customer requirements.
Environment Conditions
Δ Environment temperature ≤40ºC
Δ Relative humidity ≤90%
Δ Altitude ≤1000m, Ambient)
If altitude higher than 1500m, each 300m will cause additional de-rating 4%
Â
Genset Technical Data
 Please contact our sales before ordering.
Δ TECHNICAL DATA
| Genset Model | KT-C250S |
| Prime power (kVA/kW) | 250 /Â 200 |
| Standby power (kVA/kW) | 275 /Â 220 |
| Output frequency (Hz) | 50 |
| Rated speed (RPM) | 1500 |
| Rated voltage (V) | 400 |
| Rated current (A) | 360.8 |
| Phase | 3 |
| Fuel consumption of 75% load (L/hr) | 39 |
| Fuel consumption of 100% load (L/hr) | 53 |
| Noise level dB(A) @7m | 72.3 |
| Fuel tank capacity (L) | 500 |
| Dimension  (LxWxH) (mm) | 3400*1200*1900 |
| Weight (kg) | 2750 |
| Engine model | 6LTAA8.9-G2 |
| Alternator model | UCDI274K |
| Voltage regulation rate | ≤±1% |
| Random voltage variation | ≤±1% |
| Frequency regulation rate | ≤±5% |
| Random frequency variation | ≤±0.5% |
| Engine Specifications | Â |
| Engine model | 6LTAA8.9-G2 |
| Engine manufacturer | CUMMINS -Â DCEC |
| Number of cylinders | 6 |
| Cylinder arrangement | Vertical in-line |
| Cycle | 4 stroke |
| Aspiration | Turbocharged &Â Charge Air Cooled |
| Bore x Stroke (mm x mm) | 114 x 145 |
| Displacement (Liter) | 8.9 |
| Compression Ratio | 16.6:1 |
| Prime power/speed (kW/RPM) | 220/1500 |
| Standby power/speed (kW/RPM) | 240/1500 |
| Speed governor | BYC P7100/GAC 24V Electrical |
| Cooling system | Forced Water Cooling Cycle |
| Steady speed droop (%) | ≤1% |
| Total lubrication system capacity (L) | 27.6 |
| Coolant capacity (engine only) (L) | 11.1 |
| Fuel consumption at 100% load (g/kWh) | 197 (53L/hr) |
| Starter motor | DC24V |
| Alternator (Dynamo) | AC24V |
| Alternator Specifications | Â |
| Alternator model | UCDI274K |
| Alternator manufacturer | Stamford |
| Exciter type | Single bearing, Brushless, Self-excited |
| Rated output prime power | 250 kVA /Â 200kW |
| Rated speed | 1500 RPM |
| Rated frequency | 50 Hz |
| Phase | 3 |
| Rated voltage | 400V (Available with customer requirements) |
| Power factor | 0.8 |
| Voltage adjust range | ≥5% |
| Voltage regulation NL-FL | ≤±1% |
| Insulation grade | H |
| Protection grade | IP23 |
| Remark | Â |
| Alternator option: | Â |
| Other alternator manufacturer: copy Stamford, Leroy Somer, Marathon and Mecc Alte. | |
Δ PRODUCTS PHOTOS
Δ DETAILED PHOTOS
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?Â
Answer: Our payment terms is 1Â year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.Â
Question: Does your generators has global warranty?Â
Answer: Yes, most of our products like Cummins, , Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.Â
Question: Do you accept OEM/ODM service?Â
Answer: Yes, we can accept OEM.Â
Question: What's your payment terms?Â
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.Â
Question: What's your delivery time?Â
Answer: Our normal delivery time is 25 working days. But if your order is some special engine and alternator, then the delivery time is longer.Â
250kVA / 200kW SILENT type Diesel Generator
Powered by CUMMINS engine and coupled with STAMFORD alternator.
Prime Power:
This rating is for the supply of continuous electrical power (at variable load). There is no limit on the annual hours of operation and 10% overload power can be supplied for 1Â hour in 12.
Standby Power:
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Rated voltage:
Available with customer requirements.
Environment Conditions
Δ Environment temperature ≤40ºC
Δ Relative humidity ≤90%
Δ Altitude ≤1000m, Ambient)
If altitude higher than 1500m, each 300m will cause additional de-rating 4%
Â
Genset Technical Data
 Please contact our sales before ordering.
Δ TECHNICAL DATA
| Genset Model | KT-C250S |
| Prime power (kVA/kW) | 250 /Â 200 |
| Standby power (kVA/kW) | 275 /Â 220 |
| Output frequency (Hz) | 50 |
| Rated speed (RPM) | 1500 |
| Rated voltage (V) | 400 |
| Rated current (A) | 360.8 |
| Phase | 3 |
| Fuel consumption of 75% load (L/hr) | 39 |
| Fuel consumption of 100% load (L/hr) | 53 |
| Noise level dB(A) @7m | 72.3 |
| Fuel tank capacity (L) | 500 |
| Dimension  (LxWxH) (mm) | 3400*1200*1900 |
| Weight (kg) | 2750 |
| Engine model | 6LTAA8.9-G2 |
| Alternator model | UCDI274K |
| Voltage regulation rate | ≤±1% |
| Random voltage variation | ≤±1% |
| Frequency regulation rate | ≤±5% |
| Random frequency variation | ≤±0.5% |
| Engine Specifications | Â |
| Engine model | 6LTAA8.9-G2 |
| Engine manufacturer | CUMMINS -Â DCEC |
| Number of cylinders | 6 |
| Cylinder arrangement | Vertical in-line |
| Cycle | 4 stroke |
| Aspiration | Turbocharged &Â Charge Air Cooled |
| Bore x Stroke (mm x mm) | 114 x 145 |
| Displacement (Liter) | 8.9 |
| Compression Ratio | 16.6:1 |
| Prime power/speed (kW/RPM) | 220/1500 |
| Standby power/speed (kW/RPM) | 240/1500 |
| Speed governor | BYC P7100/GAC 24V Electrical |
| Cooling system | Forced Water Cooling Cycle |
| Steady speed droop (%) | ≤1% |
| Total lubrication system capacity (L) | 27.6 |
| Coolant capacity (engine only) (L) | 11.1 |
| Fuel consumption at 100% load (g/kWh) | 197 (53L/hr) |
| Starter motor | DC24V |
| Alternator (Dynamo) | AC24V |
| Alternator Specifications | Â |
| Alternator model | UCDI274K |
| Alternator manufacturer | Stamford |
| Exciter type | Single bearing, Brushless, Self-excited |
| Rated output prime power | 250 kVA /Â 200kW |
| Rated speed | 1500 RPM |
| Rated frequency | 50 Hz |
| Phase | 3 |
| Rated voltage | 400V (Available with customer requirements) |
| Power factor | 0.8 |
| Voltage adjust range | ≥5% |
| Voltage regulation NL-FL | ≤±1% |
| Insulation grade | H |
| Protection grade | IP23 |
| Remark | Â |
| Alternator option: | Â |
| Other alternator manufacturer: copy Stamford, Leroy Somer, Marathon and Mecc Alte. | |
Δ PRODUCTS PHOTOS
Δ DETAILED PHOTOS
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?Â
Answer: Our payment terms is 1Â year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.Â
Question: Does your generators has global warranty?Â
Answer: Yes, most of our products like Cummins, , Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.Â
Question: Do you accept OEM/ODM service?Â
Answer: Yes, we can accept OEM.Â
Question: What's your payment terms?Â
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.Â
Question: What's your delivery time?Â
Answer: Our normal delivery time is 25 working days. But if your order is some special engine and alternator, then the delivery time is longer.Â
Product Name: stainless steel filter
Main materials: 304, 304L, 316, 316L, etc.
Performance: acid resistance, alkali resistance, high temperature resistance, tensile strength and wear resistance.
Filter diameter: 5 mm to 600 mm.
Filter shape: rectangle, circle, ring, waist and other special-shaped mesh
Uses: used for screening and filtration in acid and alkali environment, as mud screen in petroleum industry, as screen screen in chemical fiber industry, as pickling screen in electroplating industry.
According to the process: 1, multi-layer spot welding filter. 2. Multi layer edge filter.
According to the shape: rectangle, circle, ring, distance, waist, special-shaped, etc.
According to the structure: single layer screen, multi-layer composite filter, combined filter.
According to the number of layers: single layer, double layer, three layer, four layer, five layer, multi-layer.
FAQ:
Q1: What problems can I solve for you?
If you have problems in filtering, I can give you suggestions, recommend products and customized solutions.
According to the feedback from my customers, the average life of my product is 10% - 15% longer than that of others.
All specifications are available in stock.
Material are purchased from one of the most famous material company in China.
Equipments are imported from Japan and Germany.
Products have accurate mesh and wire diameter, good roundness to meet all your filtering needs.
Q2: What services can I offer for you?
Every product has passed strict parameter test and element content test, quality inspection report and material list can be provided.
Sufficient inventory, continuous and stable supply, perfect process to avoid mistakes, you can go to bed after you place an order.
Exquisite packaging to protect goods from the damage during transportation.
You can also customize the label or logo.
The status of production and transportation can be provided at any time.
Q3: What are the differences in my factory?
Family business inherits the wisdom of three generations.
Export and supply to export companies for 20 years.
Wire Mesh Disc,Circular Mesh Disc,Stainless Steel Filter Disc,Stainless Steel Mesh Filter Discs
Balanat Import&Export Co.,Ltd. , https://www.balanatwiremesh.com