Vesconite (Standard Vesconite - Black) is a specialized thermoplastic made from internally lubricated polymers. Proved since the 1960's as an exceptional bearing material in demanding conditions, Vesconite gives low wear even in dirty or unlubricated conditions. Up to 10 times the life of bronze in dirty conditions. Vesconite has high dimensional stability and does not swell in water, in contrast to most synthetic materials which swell in water. For example, nylon swells up to 3% in water and softens.
Rods are Tubes are produced in Standard 1 meter lengths (39.37 inch = 3.28 feet)
Vesconite is available in Hollow bar (Bushing), Solid bar (Rod) and Plate (Sheet) form. It is easily machined and we also provide a fully finished machined bush/component service.
Features of Vesconite:
High Load Bearing Strength - VESCONITE has very low creep rates under design loadings of 4,351 psi (30 Mpa). Much higher load capacity than nylon and elastomers.
Dimensional Stability - The thermal expansion factor of VESCONITE is only 2.5 times that of bronze, lower than many of the competitors. HDPE and nylon is 5 and 10 times greater, respectfully.
No Water Swell - Only 0.5% at ambient. Negligible in sizing calculations. Most of the competition is way above this. Nylon has a 9-10% water swell. Elastomers have a 1.3 - 3% water swell. Phenolics are at generally at 1.6 - 2% water swell. Water swell is one of the primary causes leading to shaft seizure.
Low Friction - Dynamically, about half that of bronze and nylon. This allows for greater combinations of loads and speeds. Greasing of VESCONITE further deceases friction, allowing higher speeds and improved performance. Water is also an excellent lubricant for VESCONITE bushings.
Abrasion Resistance - VESCONITE provides outstanding abrasion resistance resulting in many times longer service life, when compared to bronze. It is also outperforms other products in poor lubrication and dirty conditions.
Longer Life of the Mating Surfaces - The wear of metal pins and shafts is reduced by up to 90% when VESCONITE bushings are used. This fact, alone, justifies the use of VESCONITE ΓÇô less maintenance.
Chemical Resistance Vesconite is highly resistant to diluted acids, organic solvents, oils, and petrol. It has limited resistance to strong acids and strong alkalis.
Temperature Resistance -Vesconite can withstand continuous temperatures up to 212°F (100°C) dry and 176°F (80°C) wet, with momentary peaks above this. Above 158°F (70°C) an expansion gap must be incorporated into the bearing design for a proper use.
Industries we supply Vesconite to:
- Marine
- Mining
- Railways
- Agriculture
- Earth Moving
- Heavy Transport
- Food & Beverage
- Materials Handling
- Bottling & Processing
- Steel, Paper & Textiles
- Hydraulics & Pneumatics
Vesconite Sheet Rod Bushing,Vesconite Tube Sheet,Vesconite Rod Sheet,Vesconite Tube Rod Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com
Description
Packing info
Certificate
Â
lnput power:1200W
NO-load speed:2950rpm
Table size:950*460mm
Blade Dia:250mm
Depth of cut:90°:52mm/45°:46mm
Rip Cut:920mm       Â
1pc/CTN
Carton Size:139.5*59.5*63.5cm
G.W./N.W.:69/62kg
40':110pcsCE
Workshop and test room show:
Rip Cut 920mm Tile Saw
Model NO.: PPTC1201
Control: Artificial
Certification: CE
Weight: 69kg
Packing: 1PCS/BMC
40"Gp: 110PCS
Trademark: ProPlus/OEM
Transport Package: Colour Box/Carton
Specification: 139.5*59.5*63.5cm
Origin: Ningbo
HS Code: 8467299000