Monel 404 alloy is used primarily in specialized electrical and electronic applications.[25] The composition of Monel 404 is carefully adjusted to provide a very low Curie temperature, low permeability, and good brazing characteristics. monel 400 sheet,monel 400 plate astm,monel k500 plate,monel k500 sheet Jiangsu Seonjip Technology Co.,Ltd. , https://www.seonjip.com
Features:
*Low noise and low speed for an low decibels environment.
*Special tools are made of steel and vacuum heat treated to increase operation life.
*Design of a separate breaking room facilitates cleaning.
*Primary crushing and fine breaking are conducted at the same time to increase work efficiency.
*It` s suitable for electronic products, nylon fibers, ABS, acrylic, AS and PS, and etc.
*Faster cutter replacement, easy cleaning allows rapid screen changing.
*Size of crushed granules adjustable depends on screen changed. (From 1-20mm)
*Built-in emergency safety switch, allows automatic stopping, when screening base and hopper are being opened.
*Special designs made to order for meeting clients need.
*The unloading hopper is mobile and due to comprehensive employment such as auto loaders, storage barrel
And bag etc., to exchange the necessary attachment.
*Easy maintenance, and less fee.
*Product gain equal size
*Cutter material is made by Japan Hitachi SKD-11SKH-2T. C. Tetc.,
*We can afford many models for granulated scrap and capacity volume concern and satisfied client` s requirement.
*The design has contained vision aesthetic appearance to improve the machine valuable.
Model
SSC_ 200
SSC_ 300
Power (HP)
2HP
3HP
Inlet Size (mm)
210× 300
300× 350
R. P. M
29 rpm
29 rpm
Contents (kg)
25 kg
30 kg
Capacity (kg)
8-15KG/H
12-20KG/H
Machine Size (mm)
750× 350× 980
900× 390× 1080
Machine Weight (kg)
160KG
290KG
Immediate recovery equipment 1.  375W air blower 2.  static electricity pipe 3.  cyclone separator 4.  Ratio Adjustment lubricating substance pipe 5.   Trigeminal mixed stuffing box
Monel 404 can be welded using common welding techniques and forged but cannot be hot worked. Cold working may be done using standard tooling and soft die materials for better finish. It is covered by standards UNS N04404 and ASTM F96. Monel 404 is used in capsules for transistors and ceramic to metal seals.