Longlived 430 Stainless Steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 430 stainless steel Cut Wire Shot is the most popular abrasive of them as its excellent performance. The composition of 430 stainless steeel is: C≤0.12, Cr 16.00-18.00, Ni 0, Mn ≤1.25, P≤0.035, S≤0.030, Si≤0.75. So you can check if 430 Stainless Steel Shot could meet your requirement. Generally 430 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one. 430 Stainless Steel Shot,Resistance Stainless Steel Shot,Sus430 Stainless Steel Cut Wire Shot,Ss430 Stainless Steel Cut Wire Shot Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com
Specifications:
All Metal Drivetrain.
Sealed Drivetrain & Motor. Twelve sealed areas protect the winch from water and contaminant infiltration.
1) Rated Line Pull: 3000lbs. (1, 361kgs) single-line
2) Motor: 12V DC, 1.2HP (0.9kw) permanent magnet, sealed
3) Control: Mini-rock switch and remote control, 12ft, (3.7m) lead
4) Geartrain: Sealed, all metal 3-stage planetary,
5) Gear Ratio: 136: 1
6) Clutch(freespooling): Sliding Pin and Ring Gear
7) Brake: Automatic mechanical brake
8) Drum Diameter/Length: 2.0"/2.9" (51mm/75mm)
9) Wire Rope: 40', 5.8mm diameter (12.25m, 5.8mm diam)
10) Fairlead: Roller 4-way
11) Recommended Battery: 500 CCA minimum
12) Battery Leads: Color coded wiring
13) Duty Cycle: Intermittent
14) Mounting Bolt Pattern: 76 X 124mm
15) Finish: Black or grey
 Line Pull
Lbs.(Kgs.)Â Line Speed
FT. / min (M/min.)Â Motor
Current Pull by Layer
layer / Lbs (Kgs.)
      0
 25 (7.6)
  18
 1 / 3000 (1361)
 500 (227)
 20 (6.1)
  51
 2 / 2640 (1198)
1000 (455)
 17 (5.2)
  88
 3 / 2032 (1052)
1500 (680)
 14 (4.3)
 125
 4 / 2040 (925)
2000 (907)
 11 (3.3)
 165
2500 (1134)
  9 (2.7)
 204
3000 (1361)
  7 (2.1)
 240