The STL water-jacketed gold concentrator is a kind of gravity separation equipment. It was developed by Changchun Gold Research Institute Co., Ltd. in 1985 and entered the market. At present, it has been used in many domestic and foreign companies. It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.
The main indicators of this series of equipment basically reach the level of similar international products (such as Nielsen gold selectors, etc.). Compared with similar equipment at home and abroad, this series of equipment has the advantages of high cost performance, easy operation, and low maintenance costs.
Gold Concentrator,Best Gold Concentrator,Gold Dust Separator Machine,Centrifugal Separator Gold Changchun Gold Research Institute Co.LTD , https://www.ccgrizbs.com
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobileÂ
wires, telecommunication wires, and other kinds of copper wires, in order to recoverÂ
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..
Cable Wire Granulator Main Features:Â
1.  No water needed, just put cable wires into the plantÂ
2.  Turnkey and compact type, PLC controller,Â
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Raw Material Input:Â 
Final Copper&plastic granules output:
Copper Wire Recycling Working Process:Â
Copper Cable Granulator Technical Parameters:Â
ModelÂ
Processing
capacity
Processed wire dia.
Total power
Voltage
DimensionÂ
WeightÂ
FC-400-1
80-120kg/h
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250kg/h
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400kg/h
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400kg/h
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800kg/h
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200kg/h
129.6KW
16*10*3m
12000kg
Different Models of scrap copper wire granulator:Â 
Contact us freely for more detailed quotation.Â
Â
Cable Wire Granulator General IntroductionÂ
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobileÂ
wires, telecommunication wires, and other kinds of copper wires, in order to recoverÂ
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..
Cable Wire Granulator Main Features:Â
1.  No water needed, just put cable wires into the plantÂ
2.  Turnkey and compact type, PLC controller,Â
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Raw Material Input:Â
Final Copper&plastic granules output:
Copper Wire Recycling Working Process:Â
Copper Cable Granulator Technical Parameters:Â
ModelÂ
Processing
capacity
Processed wire dia.
Total power
Voltage
DimensionÂ
WeightÂ
FC-400-1
80-120kg/h
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250kg/h
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400kg/h
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400kg/h
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800kg/h
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200kg/h
129.6KW
16*10*3m
12000kg
Different Models of scrap copper wire granulator:Â
Contact us freely for more detailed quotation.Â
Â
Wide Application Industrial /Enameled/Motor Copper Wire Cable Granulator
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Cable Wire Granulator General Introduction 1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.