UHMW PE
Ultra-high
molecular weight polyethylene (UHMW-PE) sheet is a high-tech product
independently developed by our factory based on foreign advanced
technology. It is a kind of thermoplastic engineering plastic with
excellent properties. It has incomparable advantages of ordinary
polyethylene and other engineering plastics. It is listed as a national
technology innovation project by the National Economic Committee.The
sheet has high impact resistance, extremely low water absorption,
extremely low friction coefficient, excellent self-lubrication,
excellent non-stickiness and excellent corrosion resistance to acid and
alkali.Therefore, it is widely used in steel, power, coal, cement,
mining etc such as coal bin, material bin, gypsum bin, lime bin, cement
bin, dump truck, mixing barrel.It solves the long-standing problems of
adhesion, bridging, rapid abrasion and low production efficiency in
these parts.It is considered as the best engineering plastic to solve
the problem of adhesion and abrasion at present by the scientific
research and design department.It has been promoted to the industry and
achieved significant economic and social benefits.
Features:
1. High impact resistance
2. extremely low water absorption
3. extremely low friction coefficient
4. excellent self-lubrication
5. excellent non-stickiness
6. excellent corrosion resistance to acid and alkali
Application:
It
is widely used in steel, power, coal, cement, mining etc such as coal
bin, material bin, gypsum bin, lime bin, cement bin, dump truck, mixing
barrel.It solves the long-standing problems of adhesion, bridging, rapid
abrasion and low production efficiency in these parts.It is considered
as the best engineering plastic to solve the problem of adhesion and
abrasion at present by the scientific research and design department.It
has been promoted to the industry and achieved significant economic and
social benefits.
Uhmw Pe,Corrugated Plastic Sheets,Chute Lining Liner Sheets,High Polymer Plastic Sheet Hebei Tongye Metallurgy Technology Co., Ltd. , https://www.hbtyyejin.com
Plug valve repair and installation
Plug valves All repairs and soldering repairs using welding operations must use welders and welding processes that meet ASME Section IX standards. All welds including butt welds should be repaired using a low-hydrogen welding process. Welding repairs shall be carried out in accordance with the approved process, and the maintenance of the main welds shall be subject to the owner's consent. Plug valve on the casting welding repair should be done before the production heat treatment. Welding repair or repair of the weld must be done before any heat treatment to eliminate metal stress. Hardness testing is required for repairs on castings due to slight hardness traversing across the weld, heat affected zone and base metal. The maximum Vickers hardness value measured with a load of 500 grams shall be 310 HV. For all repaired defects, the same NDE method originally used to detect defects should be used and tested according to the same standards. Prior to welding, appropriate tools should be used to clean the site where the welding is to be prepared and remove soil or metal debris. Do not repair the defect whose depth reaches more than 20% of the thickness of the object to be repaired. Plug Valve Installation Wherever possible, plug valves should be kept as close as possible to the datum. All working valves installed above ground, platform or other easily accessible locations 2100 mm or more should be capable of hammering to the pulley of their work. Hammering pulleys should be fitted with U-clamps, not J-bolt clamps. Valve should be suitable for both vertical position installation, but also horizontal position installation. More Keyword Search: Plug Valve