Self-priming Water
Pump
Self-priming
pump is a self suction Centrifugal Pump. It has the advantages of compact structure,
easy operation, stable operation, easy maintenance, high efficiency, long life
and strong self suction capacity. The pipeline does not need to install the
valve, just before work to ensure the pump body fluid can be stored with
quantitative cited. Different liquids can be self priming pumps of different
materials.
The principle of the
Self-Priming Pump is that the pump is filled with water before starting the
pump (or the water in the pump shell itself). After starting, the impeller
rotates at high speed, so that the water in the impeller channel flows into the
volute. At this time, the entrance forms a vacuum, so that the water inlet and
the reverse gate are opened. The air in the suction pipe enters the pump and
reaches the outer edge through the impeller channel.
Self-priming Water Pump Self-Priming Water Pump,Mh Self-Priming Multistage Pump,Jsp Self-Priming Jet Pump,Jetp Series Self-Priming Pump ZHEJIANG JUKE INDUSTRY & TRADE CO., LTD , http://www.cowelmotorpump.com
Raw material:Â
Low-carbon,black ,galvanized,stainless wire.
Advanced technologyÂ
1.Control system:Japan Panasonic intelligent PLC.
2.Touch screen:Â Weiview(Taiwan).
3.Low-voltage apparatus: Schneider(France). Variable-frequency drive:Delta(Taiwan)
4.Brake clutch motor connect the pricipal axis directely, stronger power.(Patent technology)
5.Cross wire feeding:Â Step hopper. Longitude wire feeding:Manually
6.Mesh pulling:Â Panasonic(Japan) servo motor,great power and precision.
7.Transformer cooling:Â Water cooling.
Technical Parameter
Model
JK-RM-2500B
Wire diameter
3mm-6mm
Longitude wire space
50mm-300mm
Cross wire space
25mm-300mm
Mesh width
Max.2.5m
Longitude wire feeding
Pre-straightened &pre-cut
Welding speed
45-65times/min
Cross wire feeding
Pre-straightened &pre-cut
Welding electrodes
48pcs
Rated electrical power
85kva*6pcs
Machine size
8.4M*3.1M*1.7M
Weight
4.2T
Control System
The control system adopts synchronous control technique. The welding time and separate welding are controlled by computer with PLC program touch screen system and HMI.Mesh Pulling Part
The mesh pulling system controlled by servo-motor adopts elastic tension and opening positioning mesh, which improves the precision of mesh opening size.Mesh Falling Part
The mesh falling system is controlled by step motor.Mesh Sending Part
The mesh sending system is controlled by computer. It simplifies the process that every tensile spring has to be changed when the wire diameter is different. You only need to change the pressure of welding point. Welding aperture can adjust randomly within range.Wire Feed Way
The line wires and cross wires should be pre-straightened and pre-cut.
The line wire is feeding by the servo motor, pulling the mesh the servo motor auto. The cross wires are fed automatically from the multi hopper which capacity is more over ten times than the traditional hopper.Welding Electrode
There are 48 pieces of electrodes that are special-designed and are made of square column copper. They show little wear rate and can be used on multiple sides.Transformer
This machine equips 8 pieces of typical and efficient transformer, which has 8 grades, enlarging the welding wire diameter range. Every two welding electrodes need a water cooling transformer.Power Voltage
The machine welds wire by supporting temporary current, so it requires electricity. We can design the machine according to the power voltage in your country.
Use of the productÂ
It is widely used in industry and construction, such as building board, the roof, the wall, the bridge, concrete road, the floor, the airport, cement pipe, concrete prefabricated components, retaining wall, protection slope, the tunnel, the dock, the dyke, construction reinforcing mesh; highway; railway; bridge; enclosure mesh; fencing and so on.
Factory showÂ
  Hebei Jiake Welding Equipment Co., Ltd. founded in 2000, located at the junction of Beijing, Tianjin and Shijiazhuang, Anping County, which is famous as "Hometown of wire mesh" in China, is a professional manufacturer for wire mesh machineries. The company has been developing smoothly and quickly and it has more than 100 employees. And the company has own wire mesh machineries and several pilot plants with strong technical force and advanced production and checkout equipments.
Global serviceÂ
We have sold to five continents, more than 50 countries and areas.Asia:Korea,Philippines,Vietnam,Malaysia,Pakistan,SriLanka,Kazakhstan,
UzbekistanIran, Iran, Saudi ArabiaEurope: Russia, Moldova,Poland,Serbia,Macedonia,Monaco,Spain,Portugal Africa:Egypt,Tunisia,Algeria,Morocco,Ethiopia,Kenya,Tanzania,Senegal,
Gambia,Zambia,Angola,Zimbabwe,Oceania: New Zealand,Papua New Guinea America:Salvador Mexico,Trinidad and Tobago,Colombia,Venezuela,
Ecuador, Peru, Bolivia, Brazil Chile, Argentina
Guarantee And After-sale service
1.Guarantee time: one year since machine was at buyer's factory but within 18 months against B/L date.
2.Within guarantee time, if any components are broken under normal condition, we can change for free.
3.We can send our best technician to buyer's factory for installation, debugging and training.
4.Complete installation instructions, circuit diagram, manual operations and machine layout.
5.24 hours technical support by e-mail.
6.Cecertificated
7.OEM production.
Â
Our missionÂ
1. Designing and manufacturing the highest quality wire product machine for the worldwide market.
2. Carring out general engineering work of the highest standard.
3. Providing the best and most competitive quality products through innovative techniques and dedicated product support.
4. Committing to meeting set objects by continuous improvement.
5. Strive to exceed our customers' experience.
Contact me
Hebei Jiake Welding Equipment Co.,Ltd
Address:Wire Mesh Insdustrial Zone, Anping County, Hebei Province, China
Sales: Jenny YangÂ
Mobile: +86 13739793519
If you need the machine, Just contact me anytime !
Â
Welcome to our factory!
High Quality Galvanized Reinforced Welded Mesh Panel Machine
Model NO.: JK-RM-2500B
Welding Electrodes: 48PCS
Overall Size: 8.4m*3.1m*1.7m
Weight: 4.2t
Color: Blue & Yellow
Trademark: JIAKE
Specification: CE CCC
Origin: Heibei, Anping, China
HS Code: 8515809090
Galvanized Reinforced Welded Wire Mesh Panel Machine