Analytical mold equipment is slow to develop

In recent years, it is only the mold industry in Zhejiang that it purchases more than 2,000 medium and low-end equipment from Taiwan or domestic Taiwan-funded enterprises each year. Some of China's machine tool companies are fully capable of entering this market. Starting from middle and low-end products, and then gradually to the high-end development, this may be a more practical approach. Of course, with the continuous improvement of the overall level of the mold industry, the grade of equipment needed is naturally increasing. For example, some mold companies in Zhejiang have begun to phase out Taiwanese equipment and gradually shift their purchasing vision to Japan, Europe and the United States. However, the prices of equipment in Japan and Europe and the United States are still expensive, which is a good opportunity for domestic machine tool companies.

The machine tool industry should pay close attention to the development of the mold industry, and attach importance to the equipment market in the mold industry. Even when the current task is full, it should start from the long-term development, recognize from a strategic height, and fully research and correct this market. Positioning. For example, in the field of gold-cutting equipment, especially in the middle and low-end numerical control equipment, domestic companies are equally promising.

In recent years, the automotive mold has received more and more attention in the mold market. Although the mold industry has not received the attention of the machine tool companies, the market of the automobile mold determines the development prospect of the mold is unpredictable. Every time a car is changed to a model, thousands of molds are used. The value is very high. The development of the machine tool industry should also pay more attention to the improvement of mold quality and product innovation. It is difficult to continue to develop without a single component.

The automotive mold is still the area with the widest driving surface and rapid development of the industry. Each time the automobile is changed, several thousand molds are needed, worth hundreds of millions of yuan. The automobile engine plant and closely-supported mold enterprises have formed cooperative development, development and technology. Commissioning and mass production of strategic alliances. As more and more high-strength plates are used in automobiles to reduce weight, thermoforming some super-high-strength plates and adapting them to thermoforming molds naturally become development trends.

The use of plastics and the development of new materials should be light and easy, including new types of plastics, modified plastics, metal plastics, magnesium alloys, composite materials, etc., which require new forming processes and therefore require Adapt to new molds. It is predicted that in the future mold market, the proportion of plastic molds in the total mold will gradually increase, and its development speed will be higher than other molds.

“The molds must be exquisite, they must be beautiful and elegant, and there are no defects in the interior. This requires a fine, precise and high-quality mold to adapt to it. At present, there is a big gap in the refinement of China, and refinement is often overlooked by some companies, resulting in a loss of success. ” Huaxia Mould Network experts believe that the rapid and efficient production of molds, this aspect requires the mold companies to minimize the mold production cycle, as soon as possible to mold users die delivery, on the other hand more important, so that users can use your mold to quickly and efficiently production Products. Such as multi-cavity and multi-piece production, laminated molds, use of hot runner technology to shorten the molding time and the use of multi-layer composite technology, in-mold decoration technology, high-light seamless injection molding technology, line inspection technology, multi-process composite technology, and more Multi-station technology and so on, while the intelligent parts forming process also requires an intelligent mold to adapt.

The low cost of molds means that low-cost manufacturing of molds can be achieved through mold production design, processing, and assembly, and more importantly, mold users can use the molds to reduce production costs. Huaxia Mould Network believes that the mold must be of high quality, but also to reduce costs, we must improve product quality, mold stability must be better, to ensure product consistency is also better, but also to ensure life, China's mold enterprises also need to speed up this area Research on the mold industry equipment market, compared with imported equipment, domestic equipment in the performance, reliability, accuracy, quality, delivery time and comprehensive service capabilities and other aspects of the lack of competitiveness. According to the editorial analysis, the main reason is that the capacity for independent innovation is weak, and the equipment market in the mold industry is not valued, and the system, mechanism, and management cannot be kept up to date.

First, there is a strong demand for CNC machine tools in the domestic market, especially for medium and low-end products, which are widely spread and easy to produce. Most machine tool factories are full of tasks, which makes many companies no longer pursue high, refined, sharp and difficult. The varieties and high-grade products; Second, the vast majority of machine tool companies, independent innovation ability is weak, the core technology and key technologies to master less, even if the intention is to develop high-end products, but it is more than enough; the third is the mold industry Although there is a relatively large equipment market, but because of the special nature of mold processing, especially the individual requirements are more prominent, mold enterprises are mostly small and medium-sized enterprises, ordering digital equipment is difficult to form larger quantities, so to meet the needs of the mold industry, There are indeed more difficulties, and great efforts must be made. There are also risks and levels. In view of these three reasons, the domestic machine tool manufacturers still do not pay attention to the equipment market of the mold industry, or have no time to attend to it, and have to allow imported equipment to play the leading role.