Near the Mid Autumn Festival, various moon cake iron boxes with exquisite patterns can be seen everywhere. The moon cake iron boxes on the market are getting better and better each year. Of course, a good Iron Box is not measured by its beautiful appearance, but by its good quality. Good quality. We can use it again after using it. Then, how to judge whether the quality of the iron box has reached the standard? Food Tin Box,Tinplate Food Can,Vintage Lunch Box,Tin Lunch Box,Food Iron Box Dongguan Tielangtou Hardware Products Co., Ltd , https://www.tlthardware.com
Production Introduction
HHD series hopper dryers offer an effective and low-cost method for plastic material drying, Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. For this series. Hot air blows evenly from bottom to the top of the hopper with capacity ranging from 12~1000kg.
Special Features
*Polished apperance with stainless steel hopper.
*Well-distributed hot-air, keep onstant temperature, and increase dry capacity.
*The P. I. D temperature controller.
*Interior parts are made of stainless steel.
* As the hopper body and the bottom are designed separately, therefore it is very convenient to clean.
*Overheat protection device.
*Main switch for safety purpose.
*Transparent eye-glass magnetic plinth(Optional).
Note:
*Power supply must be elected assigned voltage.
*Have any special needs, please contact us.
*Please excuse for not note if some specifications of products are changed.
When we first see the iron box, we will have an objective judgment on the box. The first thing we see is the surface of the iron box. The information reflected on the box surface, such as patterns, printing, barcodes, models and specifications, is not randomly placed. It has certain rules. The randomly printed iron box is already unqualified on the surface. Again, check the box surface for scratches, and the printed surface shall not be greater than 0.3mm * 20mm. On the front side, the pattern of the product surface is placed directly in front of and below the sunlight. In addition to the main viewing surface of the box, you can also see the inner surface, side, bottom, etc.
The above are the tips that can manufacturers share with you on how to judge whether boxes are standard. Have you learned?