â‘ Hardness:
Due to the scientific synthesis of high-molecular polyurethane elastomer materials using iron rubber, the higher the hardness, the higher the modulus, the smaller the elongation, and the better the wear resistance and heat resistance. Well, in the range of minus 35 degrees Celsius to 100 degrees Celsius, and at a pressure of 60 to 70 MPa, the maximum sealing performance can be guaranteed.
The use of viscoelastic seals made of nitrile rubber is the most complete protection against damage caused by back pressure. In the range of minus 55 degrees Celsius to 100 degrees Celsius, and under a pressure of 21MPa, due to the rubber The seal is often in a compressed state, so the compression performance of the rubber seal must be considered. It not only achieves enhanced anti-climbing performance and low friction resistance, but also has good performance in dealing with special low-temperature oil, and can also be used in combination with Anti-wear Ring double-purpose retaining ring BRL type.
Sealing products made of polytetrafluoroethylene and nitrile rubber/PTFErubber; or seals made of nylon resin and nitrile rubber, which can be used in a wide range of applications with large pressure changes and fast sliding speeds According to the working condition, the input hydraulic pressure cutout is designed on the end face of the polytetrafluoroethylene ring to prevent penetration leakage. The maximum working temperature environment is minus 40 degrees Celsius to 160 degrees Celsius; the maximum working pressure is 50MPa.
oil seals,hydraulic oil seal,track link oil seal,TCV oil seal,O-ring Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com
Semi-automatic tube bending machine has an NC control unit to allow the operator to program the bend degree (C axis)-the standard memory can store up to 16 programs each with 16 sequential bends.This allows the operator to select from the memory to bend sequence they require and load the tube and start bending. The rotating and feeding (B&Y axis) are controlled manually. Other movements as die working,mandrel working are controlled by hydraulic. Pipe Bending Machine combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.
Features on Pipe Bending Machine
Optional
Technical Specification
Â
Item
Name
Unit
Technical
01
Max. Bending Capacity:Mild Steel
mm
¢38x2
02
               Stainless Steel
mm
¢32x2
03
Min Bending Radius(Draw Bending)
mm
>=1.5D
04
Max. Bending Radius(For Machine)
mm
200
05
Mandrel Length
mm
1800
(Can be Customized)
06
Max Bending Angle
°
190
07
Bending Axis
Speed
Deg/sec
135
Accuracy
mm
±0.1
Power
KW
4Â Controlled by Hydraulic
08
Machine Size
mm
2500x650x1100
Machine Photos Reference
FAQ:
1. Q: Are you a manufacturer or trading company?
    A: Yes, we are a manufacturer.We are focusing on metal pipe/tube processing machines production.
2. Q:Where is the nearest airport to your company?
    A: Wuxi Airport or Shanghai Airport.
3. Q: How to choose the pipe/tube bending machines?
    A: You have to inform us following details:
        - Pipe Outdiameter Range
        - Wall thickness range
        - Bending Radius Value
        - The pipe material
        - Bends Number on one pipe
       - The drawings if possible
4. Q: What certificate do you have?
    A: We have both ISO and CE certificate.
5. Q:How about your service?
   A: Before Sales Serive:Â
        1. We will help our customer confirm the right model according to the offered pipe inforamtion.
        2. Welcome to visit our factory to see our machine and our workshop before you place an order.
      Â
        After Sales Service:
        1. We provide manual book,detailed machine installation,commissioning video for help you correctly  Â
        operate machine.
        2. We provide free installation,commissioning and training at our factory.If you need engineer go to
            your factory for machine installation, air tickets,food,hotel,local transportation shoule be at yourÂ
            account.
        3. Any problems on machine,we will reply you by email/tel or other online contact within 24 hours.
Packing&Delivery
Company Introduction:
Zhangjiagang BEYONG Machinery Manufacturing Co.,Ltd has been serving on tube processing machinery industries for over 15 years. We are committed to providing our customers with quality products, solutions and services provided on schedule, at competitive prices. Standard of mechanical parts including structure,characters etc... are similar with European's.For out-sourcing parts including Electric,Hydraulic,Mechanical etc...are from well-known companies.
Our Machines with full line of metal pipe processing machines including tube bending machine, circular saw machine, end forming machine, chamfering machine, saw blade sharpener,riveting machine...etc. Further more,we can customized machines with advanced technology,such as multi-function machine with draw bending+push bending+punching,straightening+bending+cutting and so on.  Â
Our machines export to Italy,Germany,Australia,Russia,New Zealand,Canada, Poland,Mexico, Brazil,Chile,Argentina,Saudi Arabia,South Africa, Egypt,England etc.
Brief Introduction on Pipe Bending Machine
Semi-automatic tube bending machine has an NC control unit to allow the operator to program the bend degree (C axis)-the standard memory can store up to 16 programs each with 16 sequential bends.This allows the operator to select from the memory to bend sequence they require and load the tube and start bending. The rotating and feeding (B&Y axis) are controlled manually. Other movements as die working,mandrel working are controlled by hydraulic. Pipe Bending Machine combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.
Features on Pipe Bending Machine
Optional
Technical Specification
Â
Item
Name
Unit
Technical
01
Max. Bending Capacity:Mild Steel
mm
¢38x2
02
               Stainless Steel
mm
¢32x2
03
Min Bending Radius(Draw Bending)
mm
>=1.5D
04
Max. Bending Radius(For Machine)
mm
200
05
Mandrel Length
mm
1800
(Can be Customized)
06
Max Bending Angle
°
190
07
Bending Axis
Speed
Deg/sec
135
Accuracy
mm
±0.1
Power
KW
4Â Controlled by Hydraulic
08
Machine Size
mm
2500x650x1100
Machine Photos Reference
FAQ:
1. Q: Are you a manufacturer or trading company?
    A: Yes, we are a manufacturer.We are focusing on metal pipe/tube processing machines production.
2. Q:Where is the nearest airport to your company?
    A: Wuxi Airport or Shanghai Airport.
3. Q: How to choose the pipe/tube bending machines?
    A: You have to inform us following details:
        - Pipe Outdiameter Range
        - Wall thickness range
        - Bending Radius Value
        - The pipe material
        - Bends Number on one pipe
       - The drawings if possible
4. Q: What certificate do you have?
    A: We have both ISO and CE certificate.
5. Q:How about your service?
   A: Before Sales Serive:Â
        1. We will help our customer confirm the right model according to the offered pipe inforamtion.
        2. Welcome to visit our factory to see our machine and our workshop before you place an order.
      Â
        After Sales Service:
        1. We provide manual book,detailed machine installation,commissioning video for help you correctly  Â
        operate machine.
        2. We provide free installation,commissioning and training at our factory.If you need engineer go to
            your factory for machine installation, air tickets,food,hotel,local transportation shoule be at yourÂ
            account.
        3. Any problems on machine,we will reply you by email/tel or other online contact within 24 hours.
Packing&Delivery
Company Introduction:
Zhangjiagang BEYONG Machinery Manufacturing Co.,Ltd has been serving on tube processing machinery industries for over 15 years. We are committed to providing our customers with quality products, solutions and services provided on schedule, at competitive prices. Standard of mechanical parts including structure,characters etc... are similar with European's.For out-sourcing parts including Electric,Hydraulic,Mechanical etc...are from well-known companies.
Our Machines with full line of metal pipe processing machines including tube bending machine, circular saw machine, end forming machine, chamfering machine, saw blade sharpener,riveting machine...etc. Further more,we can customized machines with advanced technology,such as multi-function machine with draw bending+push bending+punching,straightening+bending+cutting and so on.  Â
Our machines export to Italy,Germany,Australia,Russia,New Zealand,Canada, Poland,Mexico, Brazil,Chile,Argentina,Saudi Arabia,South Africa, Egypt,England etc.
SPGW piston seal
Material:PTFE+rubber elastomer+reinforced modified nylon
Temperature:Nitrile rubber -40~100℃
Speed:=1.0m/s
Pressure:≤50mpa
SPGO piston seal
Material:PTFE+rubber elastomer
Temperature:Nitrile rubber -40~110℃
Speed:=1.0m/s
Pressure:≤35mpa
SRUV piston rod seal
Material:NBR+thermoplastic polyurethane
Temperature: -35`90℃
Speed:=0.5m/s
Pressure:≤40mpa
SRS piston rod seal
Material:PTFE+NBR
Temperature:-40~110℃
Speed:=1.0m/s
Pressure:≤40mpa
SRCB piston rod buffer seal
Material:Polyurethane+modified polyoxymethylene
Temperature: -35~110℃
Speed:=1.0m/s
Pressure:≤50mpa
SRU piston rod seal
Material:Polyurethane
Temperature:-35~100℃
Speed:=1.0m/s
Pressure:≤40mpa
SRD iron case dust prevention
Material:Polyurethane+metal skeleton material
Temperature:-40~110℃
Speed:=1.0m/s
SRDI soft dustproof
Material:polyurethane
Temperature:-40~110℃
Speed:=1.0m/
SDS Dumbbell Seal
Material:polyurethane
Temperature: -35~110℃
Speed:=0.5m/s
Pressure:≤50mpa
SPG piston combination seal
Temperature:
NBR+Polyurethane + Modified Polyoxymethylene
Temperature:-35`110℃
Speed:=0.3m/s
Pressure:≤70mpa
SRNL piston rod seal
Material
NBR+Polyurethane + Modified Polyoxymethylene
Temperature:-35`110℃
Speed:=0.3m/s
Pressure:≤70mpa
SRDF Piston Rod Seal
Material
Polyester rubber
Temperature:-40`100℃
Speed:=1.0m/s
SDY Y-seal
Material:Polyurethane
Temperature:-35~110℃
Speed:=0.5m/s
Pressure:≤70mpa
KZT anti fouling ring
SDS Steffel
Piston main oil seal
Accurate Cold Forming Hydraulic Auto Exhaust Pipe Bending Stainless Steel Tube Bender
Model NO.: 38 NC
Type: Pipe and Tube Bending Machine
Applicable Pipe Shape: Round, Rectangle, Square, Oval, Solid Bar, Profile
Applicable Material: S. S., M. S., Copper, Aluminium, Alloy, Galvanized
Bending Theory: Cold Bending
Technical: Draw Bending
Color: Standard/Customized
Cooling System: Water Cooling
Software Optional Function: Anticipated Mandrel Extraction
Machine Optional Function: Safety Mat
Optional Function: Manual Feeding or Manual Rotating
Optional Mechanical: Tie Bar
Trademark: BEYOUNG
Transport Package: Wooden Case
Specification: 2500x650x1100mm
Origin: China
HS Code: 8462219000
Model NO.: 38 NC
Type: Pipe and Tube Bending Machine
Applicable Pipe Shape: Round, Rectangle, Square, Oval, Solid Bar, Profile
Applicable Material: S. S., M. S., Copper, Aluminium, Alloy, Galvanized
Bending Theory: Cold Bending
Technical: Draw Bending
Color: Standard/Customized
Cooling System: Water Cooling
Software Optional Function: Anticipated Mandrel Extraction
Machine Optional Function: Safety Mat
Optional Function: Manual Feeding or Manual Rotating
Optional Mechanical: Tie Bar
Trademark: BEYOUNG
Transport Package: Wooden Case
Specification: 2500x650x1100mm
Origin: China
HS Code: 8462219000
Brief Introduction on Pipe Bending Machine