Hyper Auto Co., Ltd. , http://www.piston-rod.com
PART I: Technical Information
Rated voltage DC-220V, duty cycle TD-60%, steel temperature: below 150 degree
Model
Applicable Belt Width
(mm)
Hanging Height
(mm)
Magnetic Induction
(≥ mT)
Material Thickness
(≤ mm)
Applicable Belt Speed
(≤ m/s)
Excitation Power
(kW)
Driving Power
(kW)
Overall Dimension
(mm)
Hanging Size
(mm)
Mass
(kg)
A
B
H
C
D
RCDD-8-10
800
250
65
200
4.5
15.5
3.0
2750
1360
740
1100
1110
1400
PART II: WHAT IS SEPARATOR
The magnetic separator consists of a large rotating drum that creates a magnetic field. Materials enter the separator and fall out through mesh at the base if they are not magnetic. Sensitive particles respond to the magnetism and cling to the sides of the container. The drums can be used in continuous processing of materials as they move along the assembly line, or in batch jobs, where a single batch is run through all at once.
One common use for magnetic separation is to remove unwanted metal from a shipment of goods. Magnetic separation can help companies keep materials pure, as well as remove things like nails and staples that may have crept into a shipment. The equipment can also purify ores, separate components for recycling, and perform a variety of other tasks where metals need to be separated or isolated. Equipment can range in size from a desktop unit for a lab that needs to process small amounts of material to huge drums used in scrap metal recycling centers.
Â
Complete set of AUTO-Discharging Magnetic Separator Set
Â
This series ask for a combination with metal detector. The separator won't work until the metal detector sends a singal. In that case, energy gets saved a lot. Designed as a short term shift, they have strong excitation and compared with those on continuous duty, their capacity of iron-removing is more powerful, which are thus suitable for high demand of removing iron while the iron-content is not much.
Â
Specifications:
Â
1. Optimized design by computer, so the structure is reasonable, energy consumption is low, and the performance is stable.
2. Distribution of magnetic field is scientific and reasonable with a deep penetration and a strong attraction force
3. The excitation coils have gone through some special technical treatment, which improves the electrical and mechanical performance like low rise in temperature, insulated and good heat-resisting.
4. Installation is easy, maintenance is simple and service life is long.
5. Each technical data meets the standard JB/T 7689-2004.
Â
PART III: MODEL SELECTION
PART IV: Installation Indication
 
 As you could see from the above picture, there has two installation ways for the separator: on the head or on the middle of conveyor.
Â
But no matter you install on which part of the conveyor, you need to make sure:
PARTV: USING
PART VI: Package
Ply-wooden Board Box with Iron Frame Inside
VII: Our Service
Quick Response:
Enquires by email, fax or instant message is high appreciated.
Your enquiry will be replied by email & fax within 24 hours.
Please feel free to call us at any time for any questions or documents wanted.
Â
Pre-sales Service:
All of our technical proposal will be offered by our senior engineers, based on your request.
Full production process will be shown to you by photos & video during manufacturing.
Â
Package & Transportation:
Package: Ply-wooden Box, with fixed iron frame inside.
All available shipping ways could be applied, by courier, air or sea.
Appointed shipping company or our own forwarders all could be used in shipment.
Full-way tracking the cargos for you till the goods arrive.
Â
After-sales Service:
After sales service and technical support could be offered within guarantee period, Site maintenance could be also provided.
Â
Â
NEVER HESITATE TO CONTACT ME:
Yueyang Zhong Nan Electromanet Technological Co., Ltd
www.zn-magnet.com
Â