Stainless Steel Fittings ,Stainless Steel Pipe Fittings,Steel Pipe Fittings,Ss Fittings Ningbo CCMS Industrial Co. Ltd , https://www.ccmcmachiningparts.com
2. Check whether the equipment fixture is corroded and damaged and replace it immediately.
3. When starting the equipment, check whether the fan is operating normally and whether there is any abnormal sound. If there is an immediate shutdown of the equipment, inform the maintenance engineer to overhaul it.
4. When the charge (discharge) is turned on, the indicator of the corresponding channel is lighted normally, and if there is no normal light, the repairman is inspected for maintenance.
Monthly maintenance 1. Check if the vents are blocked and remove dust.
2. Check whether the current and voltage of the equipment are normal and whether the line is aging.
3. Check if the fan is operating normally.
4. Clean the dust inside the device (do not contaminate the PCB board and the power supply to affect the performance of the device when cleaning).
Six months maintenance 1, check the line and switch is normal.
2. Check if all power supplies of the device are normal.
3, transformer insulation is not less than 5 megohms, if not reach, must re-dry the transformer.
4. Adjust the full range of adjustable mechanical parts, not less than 3 times.
5. The equipment accuracy is calibrated once every 2 times.
Breaking strength tester latest maintenance Raiders
Breaking strength tester HD-504-3 latest maintenance Raiders 1, clean the surface dust, keep the body clean.