1.Welding materials
In
Welding, substances called filler materials or consumables are used. As the
name implies, these substances provide filler or a body of molten materials
that provides a strong bond to be formed between the base metals used. Most
welding processes will also require some form of shielding to protect both the
main components and filler from being oxidized during the process.
The
type of welding materials used during welding depends on the nature of the job
intended. Electrodes draw the necessary energy in order to perform welding
applications. Luoyang Golden Egret Company has any kind of welding materials
include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod,
Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.
Welding
can be applied in different kinds of industries such as building and
construction, oil and gas, marine, power generation, steel, mine tools,
automobile, transportation and etc.
2. Welding rod
1)Cast tungsten carbide based tubular
rod
The
hard phase of the rod is cast tungsten carbide which leads to higher hardness
and better wear-resistance.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65
Mainly
used for Mining machinery, Geological tools, Petroleum drilling tools etc, by
Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GT1103
(CTC, 60-80 mesh),
GT1103-1(CTC, 20-30 um),
GT1103-2(CTC,
40-60 um)
2)The hard phase of tube rod is carbide
pellets which leads to higher impact resistance and better wear resistance than
CTC cloase rod.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65 wear test.
Mainly
used for mining machinery. Geological tools etc; by Oxy-acetylene with weak
carburizing flame.
Product recommendation:
GT2102 (Cemented carbide grit, 30-60mesh)
GT2102-2(Cemented carbide grit, 30-40mesh)
GT2102-3(Cemented carbide grit, 40-60mesh)
3)Tube rod is composited by Cemented carbide
pellets, Spherical CTC and CTC. The layer has higher impact resistance, better
wear resistance and good fluidity than other rods.
Wear resistance: the wear resistance is 6-7
times better than others. Tested by ASTM G65.
Mainly used for oil method drill bits, such as
Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT3302 (carbide pellets, 20-40mesh)
GT3302-1(carbide pellets, 14-40um)
4)The hard phase of the rod is monocrystal WC,
the welding layer has a higher wear resistance and better impact resistance.
The wear resistance is 6-7 times better than
others, tested by ASTM G65 method.
Mainly used for the repair and strength for oil
drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT4104 (Monocrystal WC, 80-200mesh)
3. Welding Rope
Made
form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The
CTC is in spherical or irregular with good wear resistance; the nickel alloy is
in spherical or nearly spherical shape with good wettability and erosion
resistance and better corrosion resistance than tubular rod.
Recommend
to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice,
Coal drill pipe, Tunnel drilling machinery etc.
By
Oxy-Acetylene Welding with weak carburizing flame.
Product
recommendation:
GS110450N
(CTC, 4mm, HRC 47-55)
GS110550N
(CTC, 5mm, HRC 47-55)
GS110650N
(CTC, 6mm, HRC 47-55)
4. Welding Bar
The
rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is
in irregular or spherical shape with better wear resistance and the nickel
alloy is in spherical or nearly spherical shape and has good wettability with cast
tungsten carbide. The cladding layer has a higher impact resistance and better
wear resistance.
Its
wear resistance and corrosion resistance is between tube rod and flexible rope.
Mainly
used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner
drill stem and Mechanical parts of Tunnel rock drill machine etc.
Welded
by Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GD4025253-3(CTC, SCTC, 4*600/6*600)
GD4030303-3(CTC,
SCTC, 4*600/6*600)
5. Welding wire
Intensified molybdenum titanium vanadium
composite chromium carbide welding wire can improve layer`s bonding strength
and tenacity. This wire can use for multilayer welding which has no peel off,
and it can maintain good wear resistance under certain impact working condition.
Product recommendation:GSQD671Mo-4(1.6mm)
Medium carbon and high chromium wear resistance welding wire has a higher
hardness, stronger wear resistance, and excellent toughness by adding a certain
amount of molybdenum alloys and boride. It has a better impact resistance and
strip resistance than high chromium cast iron type materials
Product recommendation: GSQD621Mo-4(1.6mm)
With
high sphericity & excellent alloy organization, cemented carbide pellet is
mainly used in welding, as an adding material of PTA Powder , tubular welding
rod, to improve the wear resistance of the workpieces greatly.
Product recommendation: GQ06
Cemented
carbide grit with different percent of cobalt has good abrasive resistance and
is widely used for making grinding, polishing and cutting tools.
Product
recommendation: GS08A
Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com
On January 24, 2013, the signing ceremony for the joint venture project between Shantui Construction Machinery Co., Ltd. and Manitowoc of the United States was held at the Sheraton Jinan Hotel in Shandong. Shantui chairman Zhang Xiuwen and Manitowoc crane group executive vice president Tadjuno signed an agreement. Taian Municipal Party Committee Secretary Li Hongfeng, Mayor Wang Yunpeng, Shandong Heavy Industry Group Chairman Tan Xuguang, General Manager Jiang Kui, Vice Chairman Dong Ping, Director of Construction Machinery Yan Kairong, Shan Fei General Manager Wang Fei, Deputy General Manager Cao Yongxin, Deputy Director General Manager Cheng Zhaohong, Chairman of Manitowoc’s Board of Directors Turlock and others attended the signing ceremony.
Tan Xuguang, chairman of Shandong Heavy Industry Group, said at the signing ceremony that this cooperation with Manitowoc is not only a major event in the global process of Shandong Heavy Industry Group, but also a major event in the development of the Chinese construction machinery industry. Accelerating the development of Shandong Heavy Industry Group's construction machinery segment and Manitowoc's company is of great significance. This is another major international cooperation in the field of truck cranes by Shandong Heavy Industry Group relying on its engineering machinery segment, Shantui Group, after Shandong Heavy Industries Weichai Group Holding Italy Ferretti Company and Weichai Power reorganized German KION. .
The mayor of Tai’an City, Wang Yunpeng, and the chairman of Manitowoc’s board of directors, Turlock, addressed the signing ceremony. Mayor Wang Yunpeng pointed out that the cooperation between Shantui and Manitowoc is a powerful combination that is of great significance to both parties. It is believed that Shantui Manitowoc Cranes Co., Ltd. will surely play an important role in revitalizing the equipment manufacturing industry in Tai'an and further improve the development effect of equipment manufacturing clusters in Tai'an. Turlock stated that it will strive to provide the most creative, advanced and complete lifting solutions and outstanding support services.
Founded in 1902, Manitowoc USA is a leading manufacturer of lifting equipment and food service in the world. It is headquartered in Manitowoc, Wisconsin. The Shantui acquisition is Manitowoc’s Manitowoc Dongyue Heavy Industry Co., Ltd. Shantui and Manitowoc Capitalize respectively on Dongyue Heavy Industry; Manitowoc acquires the entire equity interest of Dongyue's existing shareholder, Taishan Heavy Industry Investment Co., Ltd., and Taishan Heavy Industry Investment Co., Ltd. withdrew from Dongyue after reorganization. Heavy industry. After the completion of the project, Shantui and Manitowoc will hold 51% and 49% of the shares of Dongyue Heavy Industry respectively. Shantui will acquire Dongyue Heavy Industry's controlling stake and Dongyue Heavy Industry will be renamed Shantui Manitowoc Cranes. Limited company.
The business scope of Shantui Manitowoc Cranes Co., Ltd. includes the research, design, manufacture, sales, import and export of truck cranes, truck cranes and related service equipment, spare parts and accessories, and provides related training. Maintenance, technology and after-sales service. The two parties will use their respective resources in technology, manufacturing, marketing, branding, and capital to build China's automotive crane industry base.
