Butt Welding Machine Butt Welder Butt Resistance Welder Machinery Band Butt Welding Machines Welding application range is wide, in principle can be forged metal materials can be welded with flash butt welding. For example, low carbon steel, high carbon steel, alloy steel, stainless steel and other non-ferrous metals and alloys can be welded with flash butt welding.
LZ600 wire drawing machine
1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.
1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.
1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.
1.4 It is prohibited for multiple people to operate the same equipment at the same time to avoid accidents.
1. 5 The electric control cabinet should be placed in a clean and dry room, and the door should be closed when working to prevent dust intrusion from causing device performance degradation or failure. Air conditioning is used to maintain the ambient temperature of the electric control cabinet. Frequently check the operation of the cooling fan on the top of the electric control cabinet.
1. 6 Before starting the machine, check whether the safety device is normal.
1. 7 Do not operate the components in the electrical cabinet with power. After cutting off the main power supply, wait at least five minutes, and wait until the intermediate circuit capacitance is discharged before operating the frequency converter, motor, or motor cable.
1.8 Do not touch the IC circuits on the inverter control interface board and motor control board, as static electricity may damage these circuits.
1.9 Please provide the power supply and operating environment according to the technical requirements of Section 3.2. It is not allowed to arbitrarily change the parameters of the frequency converter and PLC. The user shall be responsible for any damage to electrical components caused by human factors.
The second Delivery inspection
2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.
2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.
2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use.
butt welding machine,butt welder,flash butt welding machinery Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com
Description of equipment
1. Tube expander
Purpose:
This expander is specially used to expand fin heat-exchanger.
The processes of expanding pipe, flaring and flanging are finished in one working cycle.
2. U-bender
This machine is using hydraulic drive,put tubes in by hands,automatic bending and unloading.There are many advant-ages,such as simple structure,reliable working,lower proce and easy to adjust etc.
3. Fin PressÂ
Main performance:
?Composition: Automatic decoiler, oil tank, initial feeding equipment (option), closed high- speed precision press, sucker collector, electric control system, pneumatic control system, hydraulic control,etc;
?Power press speed & vacuum sucker is controlled by inverter;
?Collector has protecting system for fault operation, material shortage warming, oil shortage warming;
?Touch screen and PLC electrical control system ensuring the reliable operation of the automatic stamping .
4. Welding machine
(For pipe to pipe, pipe to "U" joint)
?Precision design for accurate pipe positioning
?Better gas coverage and cleaner welds
?Compact design for small work areas
?Commonly used for stainless steel, carbon steel and titanium alloy steel, etc
?Water cooled head for high production and larger wall thickness
For more information,pls feel free to contact us.
We design and manufacture equipments for processing aluminum, copper, Stainless Steel pipe  heat exchanger.
Description of equipment
1. Tube expander
Purpose:
This expander is specially used to expand fin heat-exchanger.
The processes of expanding pipe, flaring and flanging are finished in one working cycle.
2. U-bender
This machine is using hydraulic drive,put tubes in by hands,automatic bending and unloading.There are many advant-ages,such as simple structure,reliable working,lower proce and easy to adjust etc.
3. Fin PressÂ
Main performance:
?Composition: Automatic decoiler, oil tank, initial feeding equipment (option), closed high- speed precision press, sucker collector, electric control system, pneumatic control system, hydraulic control,etc;
?Power press speed & vacuum sucker is controlled by inverter;
?Collector has protecting system for fault operation, material shortage warming, oil shortage warming;
?Touch screen and PLC electrical control system ensuring the reliable operation of the automatic stamping .
4. Welding machine
(For pipe to pipe, pipe to "U" joint)
?Precision design for accurate pipe positioning
?Better gas coverage and cleaner welds
?Compact design for small work areas
?Commonly used for stainless steel, carbon steel and titanium alloy steel, etc
?Water cooled head for high production and larger wall thickness
For more information,pls feel free to contact us.
Welding cross-sectional area range is large, generally from dozens to tens of thousands of mm2 cross-sectional area can be welded.
Flash butt welding is widely used in welding various plate parts, pipe fittings, profiles, solid parts, tools, etc., widely used, is an economic and efficient welding method.
Stainless Steel/ Copper / Aluminum Heat Exchanger Making Machines
Model NO.: Whole machine line
Production Scope: Parts Production Line
Specification of Pipe: According Your Design
Power Supply: 380V, 50Hz, 3phase
Trademark: CMT
Specification: SGS
Origin: Jiangsu Suzhou
Model NO.: Whole machine line
Production Scope: Parts Production Line
Specification of Pipe: According Your Design
Power Supply: 380V, 50Hz, 3phase
Trademark: CMT
Specification: SGS
Origin: Jiangsu Suzhou
We design and manufacture equipments for processing aluminum, copper, Stainless Steel pipe  heat exchanger.