Plastic Profile Extrusion Line Plastic profile extrusion is a process of manufacturing plastic profiles of various shapes and sizes. The process involves melting plastic pellets and extruding them through a die to create a continuous profile. A plastic profile extrusion line is a set of machines and equipment used to carry out this process.
The plastic profile extrusion line can be used to produce a wide range of products, including window frames, door frames, decking, fencing, and pipes. The process is highly efficient and can produce large quantities of profiles in a short amount of time.
Plastic Profile Extrusion Line,Profile Extrusion Line,Pvc Profile Production Line,Pvc Profile Extrusion Machine Shanghai Jiahao Machinery Manufacturing Co., Ltd. , https://www.jiahaoextruder.com
TEKORO Tyre Foam Cleaner  can permeate, clean, refresh and protect the tyre all at once. It can remove grease and smudge from tyre, and protect tyres from UV-rays to prevent aging and cracks. It can rejuvenate tyres, bumpers and other rubber parts.
-Intense Foam activates on contact, floating dirt away without scrubbing
-Conditioners nourish and restore your tires' deep black look
-Blocking Agents protect from harmful elements that can cause cracking & fading.
Â
Tips & tricks
It's not just about shine! TEKORO tire products help prevent ozone degradation, which can cause drying, cracking and fading.Â
Always read and follow precautions and usage directions before using cleaning products. Always store cleaning products out of reach of children.Â
Â
Usage directions
1. Shake well before use. Apply to wet or dry tires. Spray foam 6' from tire in a circular and steady sweeping motion. Ensure full, even sidewall coverage.
2. Allow to dry (5 to 10 minutes).
Packing details:
Volume
Pack Qty
Carton Specs.
Carton Dimension (estimated)
Container Qty (cartons)
L(cm)
W(cm)
H(cm)
20FT'
40HQ
250ml
24pcs/ctn
Kraft paper
33
22
17
2500
5600
400ml
12pcs/ctn
Kraft paper
27.5
20.5
20.5
2500
5600
650ml
12pcs/ctn
Kraft paper
27.5
20.5
29
1816
3294
The plastic profile extrusion line consists of several components, including a hopper, extruder, die, cooling system, and haul-off system. The hopper is where the plastic pellets are loaded into the machine. The pellets are then melted in the extruder, which is a long barrel with a screw inside. The screw rotates and pushes the plastic through the barrel, melting it as it goes.
Once the plastic is melted, it is forced through the die, which is a specially designed tool that shapes the plastic into the desired profile. The die can be customized to produce many different shapes and sizes of profiles. The plastic profile is then cooled using a cooling system, which can be air or water-based.
After the plastic profile is cooled, it is pulled through the haul-off system, which is a set of rollers that control the speed and tension of the profile. The haul-off system also ensures that the profile is straight and uniform in shape.
