Installation and precautions of track connecting rod oil seal Wear ring for excavator,For excavator track,For excavator accessories Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com
In 2010, Taiyuan Heavy Industry Group Co., Ltd. became one of the first batch of 103 innovative companies in the country and the country’s first batch of key high-tech companies; in early 2011, it again won the national top 20 innovative companies and ranked 10th. This award has once again confirmed the important position of Taiyuan Heavy Industry Group Corporation in technological innovation in the corporate world.
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.
Taiyuan Heavy Industry Group wins national technology innovation demonstration enterprise
On August 5, the Ministry of Industry and Information Technology and the Ministry of Finance jointly issued the "Circular on Announcement of the List of National Technological Innovation Model Enterprises in 2011". A total of 55 enterprises were approved nationwide for the demonstration of national technological innovation in 2011. The company, Taiyuan Heavy Industry Group, has become one of the two companies that have won this award in Shanxi Province.