The maintenance frequency of the transmission varies according to the degree of use of the car. Here are some of the issues that we usually easily overlook: 1, the driver's car, whether it is changing to high gear or low gear, should try to shift at the appropriate speed, to avoid the car suddenly slow down or shake between shifts. At the same time, remember that the clutch must be fully depressed when shifting. 2, when the car moves forward, avoid changing to the reverse gear; Similarly, when the car is sliding backwards, avoid shifting to the forward gear, we must wait for the car to completely stop and then shift gear. 3, When you stop on an uphill slope due to red light or other reasons, you should use the brake to stop the car. Never use the power of the engine to drag the car to prevent it from sliding backwards. For example, some drivers like to use half-clutched clutches and half throttles to keep the car from moving backwards, but doing so can cause wear to the engine and transmission. 4. When starting a geared car, don't have the habit of putting your feet on the clutch, because it will also accelerate clutch wear. 5, When you must temporarily stop for a while, you should switch to neutral or turn off the engine.
Aumax Brand LB Series robot arms are mainly fixed on vertical plastic injection molding machine.
Robot arms are used to pick up plastic products and plastic sprues, plastic runners from injection molding machine.
Gripper rotation structure
Gripper can turn 90 degree out the mold and release the sprue and parts smoothly
Chiness and English
Language can be switched between Chinese and English
Mid-Mold induction
The arm wont go down if the mid-mold is not confirmed the signal
Prevent arm dropping
When air pressure is lower, it wll alarm and the falling proof cylinder will eject automatically to prevent arm descending.
Conveyor I/O Point
The pendant can control conveyor running
LB Vertical Manipulator Series LB Vertical Manipulator Series,Robot Arm for Vertical Injection Machine Ningbo Rainbow Plastics Machinery Co., Ltd. , http://www.injection-machine.com