In recent years, with the development of related construction projects and the development of manufacturing industry, the loader industry is also meeting new challenges. In the face of heavy-duty working conditions, the Revo loader has been continuously upgraded and achieved good results. On June 23, the Lovol FL956H EMAX jointly built by Revo Construction Machinery Group and Cummins held a launch ceremony in Qingdao, officially bringing the Revo EMAX loader to market. China's loader market pattern tends to be stable. Under the fast pace of economic development, the loader industry is moving toward high-end. The Lovol FL956H EMAX loader has injected a lot of efforts from domestic and foreign experts. It is combined with Cummins China and equipped with Lovol's exclusive Cummins 9.3. After two years, the L engine has created a small number of exclusive loader products for heavy duty conditions in China. E——Intelligent energy saving [Intelligent loader exclusive engine] Cummins 9.3L engine and drive train curve perfectly match, automatically adapt to altitude, high reliability, low fuel consumption, lower cost of use, energy saving effect increased by 10%. [Intelligent multi-level power hydraulic system] Super power, light energy saving, energy saving effect increased by 8%. [Intelligent Human-Computer Interaction] (Intelligent Instrumentation) products run real-time monitoring; (Intelligent Monitoring System) has a wider field of view and safer driving; (Intelligent Air Suspension Seat) has better damping effect and more comfortable driving. M - higher efficiency [Ultra-large load] rated load of 5.5 tons, the industry's first [Super Workload] Standard 3.3 cubic bucket, the industry has the largest tonnage, and the bucket bucket is optimized, the full bucket rate is higher, and the larger the workload. A - super performance [Ultra-high stability] The wheelbase is up to 3300mm, and the industry of the same kind is leading and the stability is stronger. [Super Excavation Force] Optimize the performance of the working device, increase the bucket lifting force by 23%, leading the industry X - excellent quality [The new generation of box frame] has a patented frame hinge structure, after 600,000 bench impact fatigue experiments, 800 hours of intensive experiment, 10,000 hours of industrial experiments, to achieve super load carrying capacity [Full-generation gearbox] new patented overrunning clutch, reliability increased by 40% [A new generation of enhanced drive axle] technology comprehensive upgrade load capacity increased by 60%, life expectancy increased by 50% (this article from Revo Heavy Industry) High Speed Stretch Film Machine
Machine Pictures:
CL-80/100/80H-2000MM
CL-80/100/80H-1500MM
Featurers of Model CL-80/100/80H-1500mm
1.Strong Double Layer Vacuum Box Device
Strong Double Layer Vacuum Box Device helps absorb the hot air between film and cooling roller,which makes the film be more closed and tightly to the cooling roller thus enhance the cooling effect when the machine is running in high speed.
2. High Quality and Updated Advanced Cooling System
The cooling roller's diameter is 1000mm with bi-directional loop design and helix runner inside.The high-precision steel is adopted to ensure stable temperature on roller surface.
3.Melting Pump--Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.Installing the melt metering pump in the cast stretch film unit can make the machine produce constantly and efficiency. The pump can improve the product quality, stable the production process and decrease the energy consumption.
4.Four Air Shaft Roll Changers Device
One roll change takes only 30 seconds and this system can help produce small hand roll online when the machine is running in high speed.And so there is no need to install a Rewinding Machine to rewind,which helps save a lot of time, cost and labor.
Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.
Installing the melt metering pump in the cast stretch film unit, which can keep the production constantly and efficiency. The pump can improve the product quality, stable the production and decrease the energy consume.
The housing is made of chromium-nickel alloy or nickel-base alloy, titanium alloy. The gear is made of quenching chromium steel, other metal materials are also applicable. Bearing is made of graphite NIAG, zirconium oxide or quench tool steel.
Advantages:
FAST AND STABLE FLOW SUPPLY
Eliminated the extruder`s pulsation wave. Improve the product quality, decrease the defective rate, and decrease the waste, which can save 2% material and 25% of the unit power consumption.
STABLE AND EFFICIENCY PRESSURE CONTROL
The melt pump can provide a stable pressure, which short the discharge time obviously and make the production effectively.
INCREASE THE EXTRUDER OUTPUT AND THE MACHINE LIFE
It has been found that after install the melt pump, the max pressure wave value is the pressure after pump. Which can make the inner pressure of the extruder decrease, the melt shear strength decrease, the temperature curve gently, and restrain the temperature rising. Also the melt pump can avoid the damage to the extruder from the high pressure.
Main Technical Specification of CL-80/100/80H-1500mm
(Such as plastic film machinery.)
(1) Overall Dimensions(L*W*H): 14m*6.5*4.45
Max width of rewinding: 500mm*3
Max Rewind Diameter: ø400mm
Liner speed of machinery: 350m/min
(2)Rewind the film by combining it`s surface and core to make the film roller tightly closed and level and smooth.
(3)Remove the film roller and install the paper tube at the same time, which only takes about 25-30s and produce 2-3kg small film roller when the machine is running in high speed.
(4)Automatic edge material recycling system with on-line vacuum makes the process of rewinding more smooth, increases the fracture resistance, and decreases the limitation by liner speed.
(5)The recycling materials are extruded out from only and specific screw to stable the the extrusion system and to decrease the deviation about the weight of film.
(6) The extrusion machine is driven by coupling which stables the extrusion process and therefore stables the film output from die head.
(7)Prompt measurement to adjust the thickness and uniformity of the film easily.
High Speed Stretch Film Machine,Automatic High Speed Stretch Film Machinery,High Speed Stretch Film Unit CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , https://www.clxmachinery.com
