JHP series gold-loaded carbon medium temperature non-cyanide desorption and same temperature electrolysis equipment was developed by Changchun Gold Research Institute Co., Ltd. in 1998 and entered the market. It has been used in more than 800 enterprises at home and abroad. This series of equipment is oriented to the gold-loaded carbon in the gold cyanide carbon slurry process for gold desorption and electrolysis, and the gold adsorbed on the gold-loaded carbon is produced in the form of high-grade gold mud. After decades of practical application and continuous optimization and improvement in enterprises, this series of equipment has developed to the fifth generation.
Gold Electrowinning Equipment,Mining Equipment,Gold Process Equipment,Gold Processing Equipment Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com
Technical indicators:
Signal: Receive signal sensitivity of a ST series vibration speed sensor: 20mV/mm/s ± 5%
Frequency response: 5 ~ 300Hz
Range: 500μm (peak-to-peak) or 0-50.0mm/s (true RMS)
LED indication: OK green, Alert, Danger red
Measurement error: ±1% of full scale
Current output: 4-20mA active, output load ≤500Ω
Alarm point setting: 0-100% full scale, accuracy ± 1%
Alarm reset mode: automatic or manual (site reset button, remote alarm reset terminal),
Following electrical sealing: epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
Power-on delay: about 10 seconds
Temperature range: -25°C to +65°C during operation
-40°C to +85°C during storage
Relative humidity: up to 95%, no condensation
Dimensions: 90W × 120L × 75Hmm
Installation size: 80×90mm
Weight: about 660g
BSQ015d-A02-B01-C01 vibration transmitter
Accuracy:
Standard output error: 1%
l working environment:
Working temperature: -20 ° C ~ 70 ° C
Storage temperature: -30 ° C ~ 85 ° C
Relative humidity: 20~95% non-condensing
HN-3/CZ750/VB-Z420/XZD-Z/RDXZ-2/HZD-Z/JX5021A/B/JX5022A/B/ZXP-J220/MZD-SH axis vibration monitor
RKR-939B fan safety operation monitor / KR-939B3 fan safety monitor / KR-939B4 fan safety monitor
KR-939B4-4 equipment safety monitor / KR-32 dual channel equipment safety monitor / KR-34 four channel equipment safety monitor / KR-939NCS type fan speed frequency meter / HY-201V vibration temperature combination monitor HZD -B-5/HZD-B-4/Integrated, Vibration Transmitter
HZ-847/VB-Z470B/VB-Z470/JM-C-7F/SZC-04F/HZS-04F/JX5031T03/ EN2000A3/IC-3A/IC-3AP positive and negative speed monitor HY-VT5 vibration display transmitter
CA79860-01-00 Connecting Cable CA79860-06-00 Connecting Cable CA79860-18-00 Connecting Cable CA79860-24-00 Connecting Cable CA79860-2600 Cable Connector CA79860-3900 Cable Connector HZDYB Integrated Explosion-proof Vibration Transmitter
B49 (UHZ) series magnetic flip column liquid level sensor SZCB-01i type explosion-proof magnetic resistance type speed sensor SZ-6i type explosion-proof magnetic electric speed sensor TD-1i type LVDT sensor CWY-DO eddy current sensor probe front end CWY- DO810030 eddy current sensor extension cable TRLS-9 low frequency vibration speed sensor TRLV-9200 vibration speed sensor TRLV-9268 vibration speed sensor TRLV-8 vibration speed sensor GA-GT-61 acceleration sensor TR2001 axial displacement transmitter TR2011 shaft vibration transmission TR2081 speed transmitter TR2031 shell vibration transmitter TR2061 bearing vibration transmitter TR3001 axial displacement transmitter TR3011 shaft vibration transmitter TR3081 speed transmitter TR3031 shell vibration transmitter TR3061 bearing vibration transmitter WB- 8501C digital display axial position detection system WB-8112B digital display dual channel vibration detector instrument WB-8521C digital display relative expansion detector
HZD-B-5/HZD-B-4/Integrated, Vibration Transmitter
HZD-B-5/HZD-B-4/Integrated, Vibration Transmitter