268ton Variable Pump Injection Molding Machine

  • Model NO.: KWV268
  • Structure: Horizontal
  • Plasticizing Way: Screw Type
  • Automation: Automatic
  • Clamp Force: 268ton: Shot Weight: 577g
  • Transport Package: Plastic Film
  • HS Code: 8477101090
  • Type: PP, PE, PC, PA, ABS, Pet, PVC etc.
  • Plastic Type: Thermoplastic
  • Clamping Way: Hydraulic & Mechanical
  • Computerized: Computerized
  • Trademark: Kingway
  • Origin: Ningbo China

KW Variable Pump Injection Molding Machine

KWV series high efficiency energy saving variable pump injection molding machine is equipped with high efficiency and high response proportional variable pump system. The power output is automatically matched according to the machine action. There's no waste of high pressure throttle and overflow power. It has sensitive dynamic following performance. In comparison with the traditional injection molding machine, energy saving reaches 20-40%. At the same time, it saves water and oil 20-40% that greatly increase profit. This machine applies high performance precise oil filter which keeps the oil pollution grate below NAS8 while in normal continuous working.
268ton Variable Pump Injection Molding Machine

 

Ningbo Kingway Machinery Co., Ltd
Technical parameter
Item  Unit      Model KW268
Injection unit
Screw type / A B C
Screw diameter mm 50 55 60
Shot volume(theoritical) cm3 530 641 763
Injection weight (PS) g 477 577 687
Injection rate g/s 187 227 270
Injection pressure Mpa 211 175 147
Screw rotation speed  r.p.m 170
Clamping unit
Clamping force KN 2680
Open stroke mm 525
Space between tie bars(W*H) mm 580*580
Max. mould height mm 580
Min. mould height mm 220
Ejector stroke mm 150
Ejector force KN 54
Others
Max. Pump pressure Mpa 14
Pump motor power KW 22
Heating power KW 16
Machine dimension(L*W*H) m 5.8*1.55*2.1
Machine weight  t 8
 
 

Rotary Jet Drilling Machine

1) Engine: adopts the famous brand turbocharged version engine
2) Crawler Driving Gear: the designed motor with a speed reduction gearbox prolongs the service life
3) Hydraulic oil pump: It uses parallel gearbox (which is a patent) to separate oil pump monomer, supply adequate power and distribute reasonable. The hydraulic system adopts unique design, which is easy to maintain and can lower the maintenance cost.
4) Rotary head device: integrated casting gearbox , dual motor power, large torque, durable, small maintenance costs
5) Drill chassis: the professional excavator chassis provides durability and strong load capacity, the wide roller chain plate causes small damage to the concrete pavement
6) Lifting force: patent designed composite arm with small size yet long stroke, double cylinder lifting, strong lifting capacity
7) The lift arm is installed with a limiter to protect cylinder and ensure the safety of work
8) Each hydraulic tubing is covered with a protective shell to effectively extend the service life of pipeline.

Rotary Jet Drilling Machine,Rotary Jet Drill,Jet Swirl Machine,Jet Vortex Machine

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com