Waterjet Cut Parts,Water Jet Cutting Head,CNC Water Jet Cutter Head,Pure Waterjet Cutting Head Assembly Foshan Hairan Machinery And equipment Co.,LTD , https://www.hairannozzle.com
Analysis of Common Faults of Automatic Weighing Machine:
1) Why can't the equipment be weighed?
A. Check if there are other items touching the weighing tray;
B. If the equipment is calibrated, it can be recalibrated;
C. Is there wind blowing against the equipment;
D. Compare whether static weighing and dynamic weighing are consistent. If not, correct it by “dynamic learningâ€.
2) Remove the device does not work?
A. First check that the power supply is connected properly;
B. The power supply is normal, and click on the corresponding "remove port" action in the fault detection.
C. If it does not work, check to see if it is selected to cull the port in the culling port.
3) Static weighing and dynamic weighing do not match?
The weight of the object is in both static and winter conditions. The error in the weighed result itself can be corrected by “dynamic learningâ€.
4) The conveyor is not operating?
A. In the case of all conveyors are not running: Check the power supply;
B. In the case that one or two paragraphs are not running: It can be checked whether the motor drive is good or bad by adjusting the motor and the driver;
5) Conveyor belt problem 1) If the equipment works abnormally or the accuracy, speed, etc., please check whether the conveyor belt of the consumable parts is cracked;
2) Check the conveyor with no deflection, if there is deflection, adjust the adjusting device on both sides until the belt is not deflected;
6) Accuracy and speed issues 1) Check whether the conveyor belt is cracked or deflected. After such problems can be replaced or adjusted to the normal position, test again;
2) Check the operation interface, whether the parameter setting is correct or not; if you want to set the parameter, you can reset the value you want to set according to the instruction manual, and use the actual measurement product 10 times to see if the accuracy is stable;
7) After removing or inspecting the device, properly reset the connectors and parts that have been removed for inspection. After the inspection, reset it correctly.
8) Comprehensive inspections are necessary when there is a sudden change in the environment due to a non-equipment factor, an abnormal power source due to a lightning or abnormal voltage, a fall or impact of the machine, or a direct accident caused by normal use.
Regular maintenance can not only save costs, but also make production work more normal.
This article is shared by Shanghai Shigan Industrial Co., Ltd. If you want to learn more about the automatic weighing machine, you can contact us directly. Thank you for your support!
Analysis of Causes of Common Problems in Automatic Weighing Machines
The range of automatic weighing machines is now more and more widely used. With the widespread use of automatic weighing machines, more and more users realize the benefits of automatic weighing machines. However, automatic weighing machines have been used for a long time. Inevitably there will be some failures. For this reason, everyone should not worry, we can first try to analyze it and find out why. Today Xiao Bian came to talk about the causes of the common problems of automatic weighing machines. I hope everyone can read this article carefully and bring you some help.