14 Inch Electric Bikes,Folding E Bike,Lectric Ebikes,Electric Balance Bike Shenzhen Qingmai Bicycle Co.,Ltd , https://www.qmwheel.com
2. The excitation mode of gasoline-electricity welding unit and gasoline generator unit is different. It provides the more stable excitation power to the rotor through the excitation coil, so its power generation state does not have a voltage regulator. Gasoline power generation welding unit is mainly composed of motor stator, control panel, rectifier and reactor. Its circuit includes a power generation system, an electric welding system, and an energy receiving system.
(1) The basic principle of the power generation state: The excitation power is supplied from the excitation coil to the fixed rotor through the rotation of the gasoline engine, and at the same time, the 220V power generation coil in the stator rotor generates current to supply power to the electrical appliance.
(2) Basic principle of power generation state: The excitation power is supplied from the excitation coil to the stator and rotor by the gasoline Yang rotation, and at the same time the 45V (6 groups) power generation coils in the fixed rotor generate current to supply power to the rectifier bridge, through the rectified 28V. DC power is provided by the reactor draw control panel to provide power for welding.
No current output:
1. The excitation coil does not generate electricity or the excitation coil rectifier bridge burns out. Measure the voltage across the brush (DC18V).
2. Burnout of the power coil or carbon wear is not in contact. Replacement processing.
Low output voltage:
1, welding, power conversion switch did not fit in place. Adjust the switch cable.
2, the frequency is too low. Adjust the speed control bolt of throttle operation handle and adjust the frequency to 53-53.5Hz.
Low welding current:
1. The gasoline engine's power is reduced or the speed is decreased. Observe that the gasoline engine shakes when welding.
2. The diode of the rectifier bridge is burned out. Check that the diode of the rectifier bridge has scorch marks.
3, control panel burn rectifier or current regulator damage, check and repair.
How Ito Gasoline Electric Welding Machine Works
Ito Gasoline Electric Welding Machine's working principle 1, gas-powered electric welding machine is a gasoline engine as a power source, by driving the stator and rotor of the generator between the mutual movement, cutting the magnetic field generated current, to complete the use of electrical appliances to provide mobile power products.