Each designation in the CNC program has a certain fixed format. The format of the controller is different. Therefore, instructions must be written according to the controller's instruction format. If the format is wrong, the program will not be executed and the program will not be executed. Alert message. Table 1 Address and Command Range (FANUC 0M) function Address Metric units Imperial units Program number : (ISO) O (EIA) 1-9999 1-9999 Sequence number N 1-9999 1-9999 Prepare the function G 0-99 0-99 Axis word X, Y, Z, Q, R, I, J, K ±99999.999mm ±9999.9999inch A, B, C ±99999.999deg ±9999.9999deg Feed function F 1-100000.0mm/min 0.01-400.0inch/min Spindle speed function S 0-9999 0-9999 Tool function T 0-99 0-99 Auxiliary function M 0-99 0-99 Stay X, P 0-99999.999sec 0-99999.999sec Subprogram number designation P 1-9999 1-9999 repeat times L 1-9999 1-9999 Correction number D, H 0-32 0-32 The product structure is firm, the size is accurate,and can be customized for various vehicle models,which can be designed, developed and manufactured independently according to customer requirements, the customer unanimously gives the high praise, Metal Parts Stamping,Stainless Steel Stamping Product,Aluminium Stamping Parts,Stamping Of Sheet Metal Parts Product NINGBO YINZHOU HONGBO AUTOPARTS CO., LTD., , https://www.honghuaqiye.com
Especially care should be taken when entering numerical data. General CNC milling or MC can choose to use metric units "mm" or imperial units "inch" as the unit of coordinate values. The metric system can be accurate to 0.001mm, and the inch system can be accurate to 0.0001 inch, which is also the minimum amount of movement of general CNC machines. If you enter X1.23456, the actual input value is X1.234mm or X1.2345 inches, and the extra value is ignored. And the number of words can not be too much, generally limited to 7 words, such as the input X1.2345678, due to more than 7 words, there will be a warning message, Table 1 is the address and command value range.
The listed in Table 1 is the range of instructions that the computer can accept, and the actual scope of use of the CNC machine tool is limited by the machine itself, so it should refer to the CNC machine tool's operating manual. For example, in Table 1, the X axis can be moved ± 99999.999mm, but actually the travel of the X axis of the CNC machine tool may only be 650mm, and the feed rate F may be input as 100000.0mm∕ min. However, the actual CNC machine tool may be limited to 3000mm∕min. the following. Therefore, during the production of the program, it is necessary to determine the actual limit of CNC machine tool specifications, so it must refer to the instructions issued by the CNC machine tool manufacturer.
the specific price is subject to the quotation of the salesperson at that time, welcome to consult