Introduction: Air compressors are referred to as air compressors to compress gas. Air compressors and pumps are similar in structure, and most air compressors are reciprocating pistons. There are many types of air compressors, including air-conditioning compressors, refrigerator compressors, oilfield compressors, and refrigeration compressors. The following are seven precautions when operating the air compressor:
Wood Chips machine is the special equipment of making high quality wood chips for flakeboard, the base of production and export of fiberboard, and papermaking and wood chips plant.
It is widely used in stock workshop section of industrial manufacture. For example, the flakeboard, fire board, building board, straw power plant.The raw material is small diameter wood,timber harvesting, processing residues (such as branches, twigs, planks, logs cores,waste veneer, etc), it can also be used for other materials (such as sugar cane, reed,bamboo,etc.).
Wood Shredder Machine,Wood Chip Press Machine,Wood Crusher Chipper Shredder,Professional Wood Chipper Shandong Kingoro Machinery Co., Ltd , https://www.sdkingoromachinery.com
1. When the air compressor is installed, it is necessary to have a wide and well-lit place for operation and maintenance.
2. When the air compressor is installed, the ambient temperature must be lower than 40°C, because the higher the ambient temperature, the less the output air volume of the air compressor.
3. For those who have access to the roads and conditions, they may install a crane to facilitate the maintenance of the air compressor equipment.
4. The relative humidity of the air should be low, with little dust, clean air and good ventilation.
5. If the factory environment is poor and there is a lot of dust, install pre-filter equipment.
6. Reserve space for maintenance. There must be at least 70 cm distance between the air compressor and the wall.
7. The air compressor is at least one meter away from the top space.