SYPT H-EUPEX high flexible couplings are for shaft connection of machines,they compensate for shaft misalignment,generating only low  restorative forces.  The torque is conducted through elastomer flexibles, so the coupling  has typically flexible rubber properties. The flexible inserts of the H-EUPEX coupling are subjected to compression. If the flexible inserts are irreparably damaged, the hub parts  come into contact with metal. This "emergency operation capability" is required, etc., in the case of fire pump drives. The motor torque is transmitted to the hub at the drive end via  the shaft-hub connection, which is mostly designed as a keyway connection. The torque is transmitted to the hub on the output  side with the aid of elastomer flexible inserts. The hub on the output  side further transmits the torque to the driven machine or a gear  unit placed in between. Because of the primarily compressionloaded  elastomer flexible inserts, the coupling has a progressive  torsional  stiffness.     Please contact us to learn more. The fixing angle of a Tower Crane refers to the angle at which the crane is secured to its base or foundation. It is important to ensure that the crane is properly fixed at the correct angle to ensure stability and safety during operation.
It is important to follow the manufacturer's guidelines and recommendations when setting the fixing angle of a tower crane to ensure safe and efficient operation. Improper fixing angle can lead to instability, tipping, or other safety hazards.
Tower crane fixing angle is connected between tower body and concrete foundation. Usually, the model of fixing angle is based on the tower crane Mast Section, such as 1.2m s24 mast section, 1.6m L46a1 mast section, 2.0m l68b2 mast section.
Fixing angle is used for connecting of tower crane foundation and tower crane body. Usually the fixing angle is fixed inside the concrete foundation. However, there is one type of tower crane fixing angle which is reusable type. The reusable type fixing angle could be removed from the foundation after tower crane disassembly. Fixed Leg Fixing Angle,Reusable Fixing Angle,Tower Crane Fixing Angle,Tower Crane Reusable Fixing Angle,Foundation Anchor Fixing Angle SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com
Â
Parts No.
  part 1+part4
The fixing angle of a tower crane is typically determined by the manufacturer and specified in the crane's operating manual. It is usually set at a specific angle to provide optimal stability and load capacity for the crane.
The fixing angle can be adjusted during the initial installation of the crane to ensure it is level and properly aligned. This is typically done using leveling jacks or other adjustable components at the base of the crane.
