Today, the reporter learned from the Xinghualing District sanitation team in Taiyuan City that, in order to effectively solve the problem of odor overflowing around the trash can, Xinghua Ridge District has newly purchased a special cleaning vehicle for rubbish bins, which is mainly used in nearly 1,000 rubbish in the area. The regular cleaning of the barrels is not only fast and clean, but also easy to operate. Using high-pressure water mist, a large trash can can be cleaned in two or three minutes and will not cause any pollution to the environment. For a long time, there has been a deadly sanitation around the trash can. After the internal rubbish smells, it will inevitably emit odor and affect the city environment. In the past, the sanitation department could only use manual scrubbing to clean the trash, which was inefficient and had poor cleaning results. In order to improve this situation, Xinghualing District has specially purchased a garbage can cleaning truck to carry out cycle cleaning of the city's trash can, which has improved the quality of cleaning and cleaning of the trash can. During the cleaning process, the sanitation worker hangs the empty trash can at the rear of the cleaning vehicle, and then controls the button to automatically put the trash can into the cleaning tank at the back of the vehicle. Finally, the water sprayed by the high pressure water gun in the carriage. The inside and outside of the trash can be washed clean, the whole process takes only two or three minutes, and carried out in a closed compartment, to avoid secondary pollution caused by the sewage after cleaning on the road surface. In order to enhance the cleaning effect, the Xinghualing District sanitation team also added detergents, deodorants and fly killers to the water to eliminate dirt, dirt, and flies. At present, the Xinghualing District sanitation team has specially arranged six dust bins to clean the full-time sanitation workers, and carried out thorough cleaning of 64 main and secondary roads and more than 800 garbage cans in the area to ensure the cleanliness and beauty of the area's environment.
Alligator shear is used for cold shearing of all kinds of scrap metal profiles and mechanism parts, suitable for small and medium-sized scrap steel processing centers, renewable resources processing enterprises, scrap car dismantling enterprises, non-ferrous metal industry, etc.
Features for aluminum tube steel pipe automatic shearing machine
1. Automatic hydraulic control, overload protection can be realized, and diesel engine can be configured as power system;
2. With both manual and automatic modes, which can be switched at any time;
3. Chain and plate conveyor can be configured to realize continuous feeding, reduce labor intensity and facilitate installation.
Hydraulic Alligator Shear, Automatic Alligator Shear, Mobile Alligator Shear, One-piece Alligator Shear, Crocodile Shear Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycling.com